Kenwood KAC-943 User Manual

Prevent fire and personal injury by following safety guidelines for power supply, handling, and unit temperature.

Disconnect battery, connect leads, ground cord, power cord, install unit, then reconnect battery.

Selects amplification method: STEREO, L+R (combined), or MONO(L) (high-power mono).

Protects the unit and speakers from accidents. The power indicator lights green when activated.

Activates due to speaker output shorts, unit malfunctions, overheating, or improper grounding.

Illustrates system connection using RCA cables and power control cord to the center unit.

Connect speaker cords to the appropriate speaker terminals, observing polarity indicated in the diagram.

Connect the power cord and ground cord to their respective terminals, ensuring proper grounding.

Securely mount the unit using self-tapping screws onto an installation board of at least 18 mm thickness.

Install in a location allowing heat dissipation, like the trunk, avoiding obstructions to cooling fans.

Guide to resolve issues like no sound, low/high level, or distorted sound by checking connections and settings.

Details output power, frequency response, signal-to-noise ratio, sensitivity, and filter frequency ranges.