Need help?Do you have a question about the Kenwood KAC-PS300T and is the answer not in the manual?
Switch to select the amplifier's operation mode (STEREO, MONO, TRI-MODE).
Switch to apply high-pass or low-pass filtering to speaker outputs.
Terminals for connecting speakers to the amplifier.
Detailed steps for connecting power and speaker cables to the unit.
Instructions for connecting RCA cables for audio input/output.
Example for a multi-system using HPF and LPF filters.
Example configuration for a subwoofer system with a 110 Hz crossover.
Adding a subwoofer using coils and capacitors in a Tri-mode setup.
Explains frequency band division using coils and capacitors in Tri-mode.
Troubleshooting steps for no sound or sound from only one channel.
To Next Page
General