Need help?Do you have a question about the Kenwood KAC-PS501F and is the answer not in the manual?
Audio Specifications| max power output (4 Ω) 4 channel mode | 150 W × 4 |
|---|---|
| max power output (4 Ω) 3 channel mode | 150 W × 2 + 600 W × 1 |
| max power output (4 Ω) 2 channel mode | 600 W × 2 |
| rated power output (4 Ω, +B = 12.0 V) 4 channel mode | 50 W × 4 (20 Hz ~ 20 kHz, 0.05 % THD) |
| rated power output (4 Ω, +B = 12.0 V) 3 channel mode | 50 W × 2 (1 kHz, 0.05 % THD) + 200 W × 1 (1 kHz, 0.5 % THD) |
| rated power output (4 Ω, +B = 12.0 V) 2 channel mode | 200 W × 2 (1 kHz, 0.5 % THD) |
| rated power output (2 Ω, +B = 12.0 V) 4 channel mode | 100 W × 4 (1 kHz, 0.5 % THD) |
| rated power output (4 Ω, +B = 14.4 V) 4 channel mode | 75 W × 4 (DIN45324, +B=14.4 V) |
| rated power output (4 Ω, +B = 14.4 V) 3 channel mode | 75 W × 2 (1 kHz, 0.05 % THD) + 300 W × 1 (1 kHz, 0.5 % THD) |
| rated power output (4 Ω, +B = 14.4 V) 2 channel mode | 300 W × 2 (1 kHz, 0.5 % THD) |
| rated power output (2 Ω, +B = 14.4 V) 4 channel mode | 150 W × 4 (1 kHz, 0.5 % THD) |
| frequency response (+0, –3 dB) | 5 Hz ~ 50 kHz |
| total harmonic distortion (rated power) | 0.01 % (1 kHz) |
| signal to noise ratio | 110 dB |
| sensitivity (rated output) (MAX) | 0.2 V |
| sensitivity (rated output) (MIN) | 5.0 V |
| input impedance | 10 kΩ |
| damping factor | More than 200 |
| low pass filter frequency (24 dB/oct.) | 50 ~ 200 Hz (Variable) |
| high pass filter frequency (12 dB/oct.) | 50 ~ 200 Hz (Variable) |
| infrasonic filter frequency (24 dB/oct.) | 15 / 25 Hz |
General Specifications| operating voltage | 12.0 V (11 ~ 16 V allowable) |
|---|---|
| current consumption (4 Ω, +B = 12.0 V, 10% THD) | 42 A |
| dimensions (W × H × D) | 272 × 64 × 380 mm |
| weight | 7.1 kg |
To Next Page