Need help?Do you have a question about the Kenwood kac-PS520 and is the answer not in the manual?
Audio Section| rated power output (12V, 4Ω, 20-20KHz, 0.05% THD) | 90W x 2 |
|---|---|
| rated power output (12V, 2Ω, 1KHz, 0.5% THD) | 170W x 2 |
| bridged power output (12V, 4Ω, 1KHz, 0.5% THD) | 340W x 1 |
| rated power output (14.4V, 4Ω, 20-20KHz, 0.05% THD) | 125W x 2 |
| rated power output (14.4V, 4Ω, DIN45324) | 125W x 2 |
| rated power output (14.4V, 2Ω, 1KHz, 0.5% THD) | 250W x 2 |
| bridged power output (14.4V, 4Ω, 1KHz, 0.5% THD) | 500W x 1 |
| max power output (14.4V, 4Ω, Normal) | 500W x 2 |
| max power output (14.4V, 4Ω, Bridge) | 1000W x 1 |
| total harmonic distortion (14.4V, Rated Power) | 0.006% |
| low pass filter (18dB/oct.) | 50Hz - 200Hz |
| high pass filter (12dB/oct.) | 50Hz - 200Hz |
| infrasonic filter (24dB/oct.) | 15Hz |
| bass boost circuit | OFF / +6dB / +12dB / +18dB |
| frequency response (+0, -3dB) | 5Hz - 100KHz |
| signal to noise ratio | 105dB |
| sensitivity (Max) (Rated Output) | 0.2V |
| sensitivity (Min) (Rated Output) | 5V |
| input impedance | 10KΩ |
| damping factor | More than 200 |
General| operating voltage | 11V-16V allowable |
|---|---|
| current consumption (12V, 1KHz, 10% THD) | 37A |
| installation size (Width x Height x Depth) | 283mm x 58mm x 350mm |
| weight | 5.2Kg |
To Next Page