Need help?Do you have a question about the Kenwood KAC-PS401M and is the answer not in the manual?
Audio Specifications| max power output | 1200 W × 1 |
|---|---|
| rated power output at 12 V, 4 Ω | 200 W × 1 |
| rated power output at 12 V, 2 Ω | 400 W × 1 |
| rated power output at 14.4 V, 4 Ω | 300 W × 1 |
| rated power output at 14.4 V, 2 Ω | 600 W × 1 |
| frequency response | 5 Hz ~ 50 kHz |
| total harmonic distortion | 0.002 % |
| sensitivity (max) | 0.2 V |
| sensitivity (min) | 5.0 V |
| signal to noise ratio | 105 dB |
| input impedance | 10 kΩ |
| damping factor | More than 9900 |
| low pass filter frequency | 50 ~ 200 Hz |
| infrasonic filter frequency | 15 / 20 / 25 / 30 Hz |
| band reject filter frequency | 40 ~ 200 Hz |
General Specifications| operating voltage | 12.0 V (11 ~ 16 V allowable) |
|---|---|
| current consumption | 36 A |
| dimensions | 272 × 64 × 380 mm |
| weight | 7.0 kg |
Safety measures to prevent fire and injury, including cable specifications and handling hot surfaces.
Precautions to prevent unit damage from environmental factors and misuse.
Details on Low Pass Filter, Band Reject, and Infrasonic Filter functions.
Controls bass boost and slide panel operation locally.
Manages bass boost and slide panel via centre unit.
How to connect RCA cables from the centre unit to the amplifier.
Instructions for connecting speaker cables to the amplifier terminals.
Troubleshoots issues with no sound or sound from only one side.
To Next Page