Need help?Do you have a question about the Kenwood KD-44R and is the answer not in the manual?
General| Speeds | 33 1/3 and 45 rpm |
|---|---|
| Signal to noise ratio | 65 dB |
| Overhang | 15 mm |
| Output level | 2.5 mV at 1 kHz, 5 cm/sec |
| Frequency response | 20 Hz to 20 kHz |
| Power supply | AC 120V, 60Hz |
| Weight | 5.5 kg |
| Tonearm | Static balance type |
| Platter | 300 mm aluminum die-cast |
| Cartridge | Moving magnet |
| Type | Belt-drive turntable |
| Cartridge weight range | 4 to 10 g |
To Next Page
