Need help?Do you have a question about the Kenwood KD-600 and is the answer not in the manual?
General| Drive system | Direct Drive |
|---|---|
| Platter | Aluminum die-cast |
| Tonearm Type | Static balance type |
| Effective length | 245 mm |
| Overhang | 15 mm |
| Stylus pressure adjustment range | 0 to 3 g |
| Cartridge | Not included |
| Speeds | 33 and 45rpm |
| Cartridge Weight Range | 4-10 g |
| Usable cartridge weight | 4-10 g |
How to check and set the AC voltage selector switch.
Guidelines for installing the turntable to ensure optimal performance.
Placing the turntable assembly in its final location before proceeding.
Connecting audio cables, ground wire, and power supply cord.
Installing and securing the counterweight onto the tonearm.
Adjusting the vertical height of the tone arm for proper playback.
Setting the correct stylus overhang for optimal tracking.
To Next Page
