Need help?Do you have a question about the Kenwood KD-650 and is the answer not in the manual?
Explains the fundamental operating principles of the quartz PLL turntable system.
Details Phase-Locked Loop operation and Speed-Voltage servo system.
Describes touch switch operation, speed monitoring, and lock indicator circuits.
Explains the brake monitor, brake circuit, and reversal prevention functions.
Provides step-by-step procedures for adjusting PLL and lock indicator timing.
Explains the fundamental operating principles of the quartz PLL turntable system.
Details Phase-Locked Loop operation and Speed-Voltage servo system.
Describes touch switch operation, speed monitoring, and lock indicator circuits.
Explains the brake monitor, brake circuit, and reversal prevention functions.
Provides step-by-step procedures for adjusting PLL and lock indicator timing.
General| Drive method | Direct drive |
|---|---|
| Effective arm length | 245 mm |
| Overhang | 15 mm |
| Stylus pressure adjustment range | 0 to 3 g |
| Motor | DC servo motor |
| Speeds | 33 1/3, 45 rpm |
| Platter | Die-cast aluminum |
| Wow and flutter | 0.025% WRMS |
| Signal to noise ratio | 78 dB |
| Tonearm | Static balance type |
| Weight | 14 kg |
| Dimensions | 490 x 180 x 410 mm |
To Next Page
