Need help?Do you have a question about the Kenwood KD-5100 and is the answer not in the manual?
General| Drive system | Direct Drive |
|---|---|
| Motor | Quartz PLL coreless DC servo motor |
| Signal to noise ratio | 78 dB |
| Effective length | 245 mm |
| Overhang | 15 mm |
| Stylus pressure adjustment | 0 to 3 g |
| Cartridge | Not included |
| Power Requirements | AC 120V, 60Hz |
| Speeds | 33 and 45rpm |
| Wow and flutter | 0.025% WRMS |
| Tonearm | Static balance type |
| Usable cartridge weight | 4 to 10 g |
| Output Voltage | 2.5 mV |
Record the unit's serial number for warranty and service.
Adjust the voltage selector switch to match local line voltage.
The turntable works on both 50 Hz and 60 Hz power frequencies.
Instructions for proper installation to ensure safe operation.
Adjusting stylus height for optimal playback and clearance.
Step-by-step guide for automatic record playback.
How to stop playback mid-record.
Instructions for automatic record replay.
How to temporarily lift and lower the tonearm.
Cleaning the turntable's exterior.
Motor bearing lubrication details.
Recommendation for periodic dealer checks.
Proper handling and storage of records.
Information on stylus longevity and wear indicators.
How to obtain and replace the stylus.
Guidelines for packing and transporting the unit.
Technical specs for motor and turntable platter.
Technical specs for the tonearm.
Specs for the supplied cartridge.
General specs: power, dimensions, features.
Lists included accessories.
To Next Page
