Need help?Do you have a question about the Kenwood KD-3070 and is the answer not in the manual?
General| Drive System | Direct Drive |
|---|---|
| Motor | DC Servo Motor |
| Wow and Flutter | 0.03% WRMS |
| Overhang | 15 mm |
| Platter | Aluminum Die-cast |
| Speeds | 33, 45rpm |
| Tonearm Type | Static Balance S-shaped Tonearm |
| Cartridge Weight Range | 4-10 grams |
Steps for disassembling the operation assembly.
Procedure for removing the bottom case from the turntable.
Instructions for disassembling the cut button and cam.
Steps to remove the motor.
How to remove switches and potentiometers.
Procedure for disassembling the return arm assembly.
Steps to disassemble the pause cam mechanism.
Instructions for removing the return mechanism assembly.
Procedure for removing the elevation shaft.
Important safety and operational notes for installation.
Guide for correctly mounting the return arm.
Steps for mounting the operation rod correctly.
Sequence for mounting the return spring adjusting knob.
Explanation of the return mechanism's operating principles.
Description of how the pause mechanism operates.
Procedure for installing cord bushings for audio and power cords.
Lubrication points for the return mechanism assembly.
Lubrication points for the operation mechanism chassis.
Lubrication points for the pause/lifter mechanism.
Technical specifications for the motor and turntable.
Technical specifications for the tonearm.
Specifications for the supplied cartridge.
General specifications and features.
To Next Page
