Need help?Do you have a question about the Kenwood KD-2055 and is the answer not in the manual?
General| Drive System | Belt Drive |
|---|---|
| Motor | 4-pole synchronous motor |
| Platter weight | 1.5 kg |
| Tonearm effective length | 220 mm |
| Overhang | 15 mm |
| Speeds | 33 1/3, 45 rpm |
| Tonearm | S-shaped pipe arm static balance type |
| Cartridge weight range | 4-9g |
Explains how to select the correct AC voltage for the turntable based on destination and how to switch it.
Provides essential advice for installing the turntable to ensure optimal performance and safety.
Instructions for connecting the turntable's output and ground leads to a stereo amplifier.
Step-by-step guide on how to mount and align a cartridge on the tonearm headshell.
Advice on cleaning the drive belt and information on replacement parts.
To Next Page
