A
Aaron SantanaSep 7, 2025
What to do if Kenwood Car Receiver displays “READING” keeps flashing?
- NNoah AlvaradoSep 7, 2025
If your Kenwood Car Receiver displays “READING” keeps flashing, avoid using too many hierarchical levels or folders.
To Next PageTo Next PageWhat to do if Kenwood Car Receiver displays “READING” keeps flashing?
If your Kenwood Car Receiver displays “READING” keeps flashing, avoid using too many hierarchical levels or folders.
Why can't I hear any sound from my Kenwood KDC-BT265U Car Receiver?
If you can't hear any sound from your Kenwood Car Receiver, first, ensure the volume is at an audible level. If the sound is still not present, inspect the cords and connections to confirm they are properly connected. Another possible solution is to try cleaning the connectors.
What to do if my Kenwood KDC-BT265U displays “PROTECTING SEND SERVICE”?
If your Kenwood Car Receiver displays “PROTECTING SEND SERVICE”, you will need to send the unit to the nearest service center for assistance.
What to do if Kenwood KDC-BT265U displays “STATION LIMIT”?
If your Kenwood Car Receiver displays “STATION LIMIT”, retry after deleting unnecessary stations from your device.
What to do if Kenwood Car Receiver displays “NO DEVICE”?
If your Kenwood Car Receiver displays “NO DEVICE”, connect a USB device and change the source to USB again.
What to do if Kenwood KDC-BT265U Car Receiver displays “iPod ERROR”?
If your Kenwood Car Receiver displays “iPod ERROR”, try reconnecting the iPod. If that doesn't work, reset the iPod.
What does “STATION LIMIT” mean on my Kenwood Car Receiver?
If your Kenwood Car Receiver displays “STATION LIMIT”, the number of registered stations has reached its limit. Retry after deleting unnecessary stations from your device.
What does “RATING ERROR” mean on my Kenwood KDC-BT265U?
If your Kenwood Car Receiver displays “RATING ERROR”, registration of thumbs up/thumbs down has failed due to insufficient network connectivity.
What to do if Kenwood Car Receiver displays “ANDROID ERROR” / “NA DEVICE”?
If your Kenwood Car Receiver displays “ANDROID ERROR” / “NA DEVICE”, try reconnecting the Android device and restarting the Android device.
What to do if Kenwood Car Receiver says “NO DISC”?
If your Kenwood Car Receiver displays “NO DISC”, insert a playable disc into the loading slot.
General| Bluetooth | Yes |
|---|---|
| USB Port | Yes |
| CD Playback | Yes |
| FM/AM Tuner | Yes |
| Subwoofer Output | Yes |
| AUX Input | Yes |
| Display Type | LCD |
| Display Color | White |
| Button Illumination | Variable color |
| Detachable Faceplate | Yes |
| Audio Codec | MP3, WMA, AAC |
| Built-in Microphone | Yes |
| RMS Power | 22W x 4 |
| Steering Wheel Control | Yes (with adapter) |
| Preset EQ | Yes |
| Power Output | 50W x 4 Channels |
Important safety advice regarding operation, usage, and potential hazards.
Information regarding FCC regulations and device compliance for radio frequency emissions.
Details on compliance with Industry Canada RSS standards and Mexican COFETEL requirements.
Information on FCC and IC radiation exposure limits and safe operating distances.
Essential guidelines and warnings to ensure safe and proper operation of the unit.
Specific warnings and cautions to prevent accidents and ensure user safety during operation.
Identification and function of buttons and indicators on the unit's faceplate.
Instructions for operating the unit using the included remote control.
Steps to select the display language and disable the demonstration mode.
Instructions for setting the current time and date on the unit.
Guidance on configuring essential initial settings for the unit's operation.
Configuration options for display appearance and audio output characteristics.
Options for radio tuning methods, preset types, and source selection.
How to initiate playback from CD, USB, iPod, or Android devices.
Steps to launch the Pandora application and begin audio playback via Bluetooth.
Steps to activate a SiriusXM subscription and begin listening to channels.
Step-by-step guide for pairing a Bluetooth-enabled device with the unit for the first time.
How to answer or reject incoming calls and manage call waiting.
Instructions for making calls from call history, phonebook, or by dialing directly.
Streaming audio from a connected device via Bluetooth.
Adjusting tone controls like fader, balance, volume offset, and manual equalization.
Customizing display colors and adjusting screen brightness or dimming.
Solutions for common problems encountered with CD, USB, and iPod playback.
Troubleshooting steps for problems with Android device connectivity and playback.
Solutions for problems related to Pandora application connectivity and playback.
Steps to resolve issues where Bluetooth devices are not detected or cannot pair.
Solutions for problems with Bluetooth pairing, call management, and voice quality.
Troubleshooting for interrupted or skipped audio playback via Bluetooth.
Resolving issues related to controlling phone functions via Bluetooth.
Steps to fix problems with device registration limits or unsupported features.
Troubleshooting steps for common iHeartRadio reception and connectivity problems.
Solutions for SiriusXM channel lock, subscription, and content availability issues.
Troubleshooting for general Bluetooth connection stability and signal reception problems.
Diagram and instructions for wiring the unit for specific Kenwood models.
Diagram and instructions for wiring the KMR-D365BT model.
Action to take in case of abnormal smell or smoke from the unit, and contacting service.
