C
Christopher BarronSep 23, 2025
What does “NO SKIPS” mean on my Kenwood Car Receiver?
- KKelly HarmonSep 23, 2025
The “NO SKIPS” message on your Kenwood Car Receiver indicates that the skip limit has been reached.
To Next PageTo Next PageWhat does “NO SKIPS” mean on my Kenwood Car Receiver?
The “NO SKIPS” message on your Kenwood Car Receiver indicates that the skip limit has been reached.
What to do if my Kenwood Car Receiver says “MISWIRING CHECK WIRING THEN PWR ON”?
If your Kenwood Car Receiver displays “MISWIRING CHECK WIRING THEN PWR ON”, turn the power off. Check to ensure the terminals of the speaker wires are properly insulated, then turn the power back on.
What to do if there is no sound from my Kenwood Car Receiver?
If you cannot hear sound from your Kenwood Car Receiver: * Adjust the volume to the optimum level. * Check the cords and connections.
Why is sound being interrupted during playback of a Bluetooth audio player on my Kenwood Car Receiver?
If the sound is interrupted or skipped during playback of a Bluetooth audio player on your Kenwood Car Receiver: * Reduce the distance between the unit and the Bluetooth audio player. * Turn off, then turn on the unit and try to connect again. * Consider that other Bluetooth devices might be trying to connect to the unit.
What to do if my Kenwood Car Receiver is showing “PLEASE EJECT”?
If your Kenwood Car Receiver displays “PLEASE EJECT”, reset the unit. If the problem persists, consult your nearest service center.
Why is my Bluetooth device not being detected by my Kenwood Car Receiver?
If no Bluetooth device is detected by your Kenwood Car Receiver: * Search from the Bluetooth device again. * Reset the unit.
What does “NO INFO”/“NO DATA” mean on my Kenwood Car Receiver?
If your Kenwood Car Receiver displays “NO INFO”/“NO DATA”, it means that the Bluetooth device cannot get the contact information.
What does “CODE ERROR” mean on my Kenwood Car Receiver?
If your Kenwood Car Receiver displays “CODE ERROR”, make sure you have entered the correct pass code.
What does “USB HUB IS NOT SUPPORTED” mean on Kenwood Car Receiver?
If your Kenwood Car Receiver displays “USB HUB IS NOT SUPPORTED”, it means that the unit cannot support a USB device connected via a USB hub.
How to fix voice calling issues on Kenwood Car Receiver?
If voice calling method is not successful on your Kenwood Car Receiver: * Use voice calling method in a quieter environment. * Reduce the distance from the microphone when you speak the name. * Make sure the same voice as the registered voice tag is used.
Crucial information for safe and proper use of the product.
Important safety warnings regarding operation and battery hazards.
Precautions for volume setting and general usage to prevent accidents.
Warnings about handling the remote control and its battery.
Guidance on understanding the manual's structure and symbols.
Overview of the unit's front panel controls and indicators.
Description of the remote control and its operation.
Instructions on how to reset the unit to factory settings.
Steps for replacing the battery in the remote control.
Common operations like turning power on/off, adjusting volume, and changing sources.
Initial setup for language selection and disabling the demo mode.
Steps to set the current time and date on the unit.
Guide to configuring various initial system settings and options.
Settings for audio output, display illumination, and menu navigation.
Various settings including tuner presets, system options, source selection, firmware, factory reset, clock, and language.
Steps to prepare for registering the marine remote ID.
Instructions for registering the remote ID on the control unit.
Steps to remove a registered remote control ID.
Methods for finding radio stations using tuning and seeking.
Using the remote control to directly tune to a frequency.
Settings for auto memory, mono reception, news/regional programs, AF, and traffic info.
Searching for stations by program type.
Synchronizing the unit's time with Radio Broadcast Data System.
Prerequisites for using the AUX input source.
Steps to connect and play audio from an auxiliary device.
Customizing the name displayed for the AUX input.
How playback begins automatically for different sources.
Playback, track selection, repeat, and random play for CDs.
Connecting and identifying USB, iPod, and Android devices.
Playback controls for iPod/iPhone via USB.
Playback controls for Android devices via USB.
Choosing between controlling iPod/Android via the unit or device.
Selecting the internal or external memory for USB playback.
Outputting sound from apps like TuneIn via USB connection.
Navigating and selecting files for iPod/Android.
Methods for quickly searching files by browsing, skip ratio, or alphabet.
Searching for tracks/files using the remote control.
Instructions for using the KENWOOD Remote app.
Selecting drives and setting skip search ratios for USB sources.
Steps to prepare for using Pandora service.
How to connect and start listening to Pandora.
Controls for playback, skipping tracks, and thumbs up/down.
How to create and store new Pandora stations.
Finding existing Pandora stations by date or alphabet.
Saving song information to the connected device.
Removing stored Pandora stations.
Steps to prepare for using iHeartRadio service.
How to connect and start listening to iHeartRadio.
Controls for playback, station search, and storage.
Steps to prepare for using SiriusXM Radio service.
Finding the Radio ID needed for SiriusXM activation.
Instructions for activating the SiriusXM subscription.
How to connect and start listening to SiriusXM Radio.
Explanation of channel and replay keymodes.
Controls for selecting and changing channels.
Controls for playback, rewind, and fast-forward.
Using remote to tune directly to a SiriusXM channel.
Using SmartFavorites and TuneStart features for music playback.
Previewing songs on music channels.
Settings for channel locking, pass codes, and editing.
Settings for Tune Start, signal level, buffer, and reset options.
Overview of Bluetooth connection, supported profiles, and codecs.
Instructions for connecting the external microphone.
Steps to pair a new Bluetooth device with the unit.
Indicators for established Bluetooth connections.
Automatic pairing of devices connected via USB.
Handling incoming calls and connection behavior during calls.
Managing multiple calls, switching, and talk modes.
Adjusting call volume independently from other sources.
Settings to enhance microphone sensitivity and noise cancellation.
Configuring auto answer and battery/signal display.
Making calls via call history, phonebook, number dial, or voice commands.
Displaying battery and signal strength.
Using voice commands for calls and personal assistants.
Storing and making calls from memory contacts.
Settings for device connection, modes, deletion, PIN, auto-reconnect, and initialization.
Checking Bluetooth profile connectivity.
Playing audio from Bluetooth devices and controlling playback.
Configuring the unit for the KENWOOD Remote application.
Playing music from iPhone/iPod via Bluetooth.
Listening to Pandora and iHeartRadio services over Bluetooth.
Adjusting subwoofer level, equalizer settings, bass boost, and Q factor.
Settings for sound reconstruction, space enhancement, realism, stage, and noise reduction.
Selecting front, rear, and subwoofer sizes for optimal performance.
Adjusting crossover frequencies, slopes, and output levels for speakers.
Configuring time alignment for speakers based on car type and speaker setup.
Adjusting DTA position, distance, gain, and car settings.
Guide to measuring and calculating DTA distance and gain values.
Turning the display illumination on or off.
Selecting display colors and adjusting brightness levels.
Setting the dimmer on and off times.
Selecting automatic or single scroll for text display.
Troubleshooting common problems like no sound or unit not turning on.
Solutions for poor radio reception or static noise.
Troubleshooting problems with discs, files, and device recognition.
Troubleshooting playback and connection problems with Android devices.
Solutions for Pandora station limits, connection errors, and rating issues.
Troubleshooting issues with selecting or connecting to iHeartRadio.
Troubleshooting SiriusXM channel availability and tuner connection.
Settings for Tune Start, signal level, buffer, and reset options.
Troubleshooting pairing, connection, call quality, and audio playback problems.
Instructions for cleaning the unit's faceplate and connector.
Precautions for handling audio discs.
List of supported audio file formats and unplayable disc types.
Information on USB connection limitations and ratings.
List of compatible iPod/iPhone models via USB and Bluetooth.
Information on Android OS support and AOA 2.0.
Information on Pandora service availability and third-party changes.
Information on iHeartRadio service availability and third-party changes.
Information on Bluetooth device compatibility and signal conditions.
How to change displayed information by pressing DISP.
Important safety warnings for installation and wiring.
Precautions for safe installation and handling hot parts.
Step-by-step guide for installing the unit.
Detailed steps for in-dash mounting the unit.
Instructions for mounting without using the sleeve.
Steps for detaching the unit from the dashboard.
List of components included for installation.
Diagram and instructions for connecting KDC-X301/KMR-D368BT wiring.
Recommendation for professional installation using custom wiring harnesses.
Diagram and instructions for connecting KDC-BT21/KDC-MP368BT wiring.
FM and AM frequency range and sensitivity specifications.
Specifications for laser diode, digital filter, spindle speed, and wow/flutter.
USB standard, file system, and audio decode specifications.
Bluetooth version, frequency range, maximum range, and profiles.
Auxiliary input frequency response and impedance specifications.
Specifications for audio output power, impedance, tone control, and preouts.
Specifications for operating voltage, current, temperature, dimensions, and weight.
General| Brand | Kenwood |
|---|---|
| Model | KDC-BT21 |
| Type | Car Receiver |
| Bluetooth | Yes |
| USB Port | Yes |
| AUX Input | Yes |
| Display Type | LCD |
| AM/FM Tuner | Yes |
| Detachable Faceplate | Yes |
| CD Player | Yes |
| Preamp Outputs (Channels) | 2 |
| RMS Power Output | 22W x 4 |
| Audio Formats Supported | MP3, WMA |
| Equalizer | 13-Band Graphic Equalizer |
| Steering Wheel Control | Compatible |
| Maximum Output Power | 50 Watts x 4 Channels |
