What does “HF ERROR 07” mean on my Kenwood KDC-BT41U Car Receiver?
If “HF ERROR 07” appears on your Kenwood Car Receiver, the memory cannot be accessed. Turn the power off and on again. If this message still appears, press the reset button on the control unit.
What to do if “PROTECT” appears on my Kenwood Car Receiver?
If the “PROTECT” message appears on your Kenwood Car Receiver and no operations are possible, check that the terminals of the speaker leads are properly covered with insulating tape. Then, reset the unit.
How to fix “USB ERROR” on Kenwood KDC-BT41U Car Receiver?
If your Kenwood Car Receiver displays “USB ERROR”, remove the USB device, turn the unit off, and then turn it back on. If the error persists, try connecting a different USB device.
What to do if “NO DEVICE” appears on Kenwood KDC-BT41U?
If the “NO DEVICE” message appears on your Kenwood Car Receiver, connect a USB device and change the source to USB again. Alternatively, insert an SD card and change the source to SD again.
What does “HF ERROR 68” mean on my Kenwood KDC-BT41U?
If “HF ERROR 68” appears on your Kenwood Car Receiver, the unit cannot communicate with the cell-phone. Turn off the power and on again. If this message still appears, press the reset button on the control unit.
What does “NO ENTRY” mean on my Kenwood Car Receiver?
If “NO ENTRY” appears on your Kenwood Car Receiver, the cell-phone has not been registered (pairing).
Why does my Kenwood KDC-BT41U Car Receiver show “NO MUSIC” or “ERROR 15”?
If your Kenwood Car Receiver displays “NO MUSIC” or “ERROR 15”, the connected USB device or inserted SD card contains no playable audio file. Media was played that does not have data recorded that the unit can play.
What does “NA FILE” mean on my Kenwood KDC-BT41U?
If your Kenwood Car Receiver displays “NA FILE”, the unit is playing an unsupported audio file.
What to do if “NA DEVICE” appears on Kenwood KDC-BT41U Car Receiver?
If the message “NA DEVICE” appears on your Kenwood Car Receiver, connect a supported USB device and check the connections. Alternatively, check that the supported SD card is inserted.
How do I resolve the “iPod ERROR” on my Kenwood KDC-BT41U Car Receiver?
If your Kenwood Car Receiver displays “iPod ERROR”, try reconnecting the iPod. Also, confirm that the iPod's software is the latest version and try resetting the iPod.
General| Brand | Kenwood |
|---|---|
| Model | KDC-BT41U |
| Category | Car Receiver |
| Language | English |
To Next Page
