To Next PageTo Next PageWhat to do if my Kenwood Car Receiver says 'MISWIRING CHECK WIRING THEN PWR ON'?
If the Kenwood Car Receiver displays 'MISWIRING CHECK WIRING THEN PWR ON', turn the power off. Check to ensure the terminals of the speaker wires are properly insulated, then turn the power back on.
What to do if my Kenwood KDC-BT45U says 'PLEASE EJECT'?
If your Kenwood Car Receiver displays 'PLEASE EJECT', reset the unit. If the problem continues, seek assistance from your nearest service center.
How to improve radio reception on my Kenwood Car Receiver?
To improve poor radio reception on your Kenwood Car Receiver: * Connect the antenna firmly. * Pull the antenna out all the way.
General| Model | KDC-BT45U |
|---|---|
| Type | Car Receiver |
| Brand | Kenwood |
| Channels | 4 |
| RMS Power Output | 22 Watts |
| Peak Power Output | 50 Watts |
| Bluetooth | Yes |
| USB Port | Yes |
| AUX Input | Yes |
| CD Player | Yes |
| MP3 Playback | Yes |
| WMA Playback | Yes |
| AAC Playback | Yes |
| FLAC Playback | No |
| Tuner | AM/FM |
| Display Type | LCD |
| Pre-amp Outputs | 2-Channel |
| Subwoofer Control | Yes |
| Remote Control | Optional |
| Steering Wheel Control | Yes |
Guidance for proper disposal of old equipment and batteries.
Safety warnings and cautions for initial operation.
Steps to select language, cancel demonstration, and set the clock.
Detailed steps for configuring initial system settings.
How to begin playback from various media sources.
Steps to prepare and log in to the Aha™ application.
Step-by-step guide to pair a Bluetooth device with the unit.
How the unit handles incoming and ongoing phone calls.
Settings to adjust microphone gain, noise reduction, and echo cancellation.
Procedures for making calls via call history or phonebook.
Adjusting EQ, subwoofer, phase, fader, balance, and loudness.
Solutions for sound, wiring, unit operation, and radio reception problems.
Troubleshooting for disc errors, playback, and file display.
Troubleshooting Bluetooth audio playback, call quality, and device control.
Solutions for Android playback errors and mode problems.
Steps for installing the unit in-dash and removing it.
Overview of unit wiring connections and power supply.
