What to do if “NA DEVICE” appears on Kenwood KDC-BT41U Car Receiver?
If the message “NA DEVICE” appears on your Kenwood Car Receiver, connect a supported USB device and check the connections. Alternatively, check that the supported SD card is inserted.
What does “HF ERROR 07” mean on my Kenwood KDC-BT41U Car Receiver?
If “HF ERROR 07” appears on your Kenwood Car Receiver, the memory cannot be accessed. Turn the power off and on again. If this message still appears, press the reset button on the control unit.
How do I resolve the “iPod ERROR” on my Kenwood KDC-BT41U Car Receiver?
If your Kenwood Car Receiver displays “iPod ERROR”, try reconnecting the iPod. Also, confirm that the iPod's software is the latest version and try resetting the iPod.
Why is there no beep when I receive a call on my Kenwood KDC-BT41U?
No beep is heard depending on the type of your cell-phone.
Why is the number of songs different between my Kenwood KDC-BT41U Car Receiver and iPod?
Podcast files are not counted in this unit as this unit does not support the playback of podcast files.
What does “NO ENTRY” mean on my Kenwood Car Receiver?
If “NO ENTRY” appears on your Kenwood Car Receiver, the cell-phone has not been registered (pairing).
Why is the radio reception poor on my Kenwood KDC-BT41U?
Poor radio reception or static noise on your Kenwood Car Receiver can be due to antenna issues. Make sure the antenna is firmly connected and fully extended.
What does “DEVICE FULL” mean on my Kenwood KDC-BT41U?
If “DEVICE FULL” appears on your Kenwood Car Receiver, 5 Bluetooth devices have already been registered and no more Bluetooth devices can be registered.
What to do if “NO DEVICE” appears on Kenwood KDC-BT41U?
If the “NO DEVICE” message appears on your Kenwood Car Receiver, connect a USB device and change the source to USB again. Alternatively, insert an SD card and change the source to SD again.
How to fix “USB ERROR” on Kenwood KDC-BT41U Car Receiver?
If your Kenwood Car Receiver displays “USB ERROR”, remove the USB device, turn the unit off, and then turn it back on. If the error persists, try connecting a different USB device.
General| Brand | Kenwood |
|---|---|
| Model | KDC-BT41U |
| Category | Car Receiver |
| Language | English |
To Next Page
