E
Eric LiSep 6, 2025
Why is my Kenwood KDC-BT370U Car Receiver showing “NO SIGNAL”?
- DDavid HallSep 6, 2025
If your Kenwood Car Receiver displays “NO SIGNAL”, make sure the antenna is mounted outside the vehicle.
To Next PageTo Next PageWhy is my Kenwood KDC-BT370U Car Receiver showing “NO SIGNAL”?
If your Kenwood Car Receiver displays “NO SIGNAL”, make sure the antenna is mounted outside the vehicle.
What does “MISWIRING CHECK WIRING Turn the power off, then check to be sure the terminals THEN PWR ON” mean on Kenwood KDC-BT370U Car Receiver?
If your Kenwood Car Receiver displays the message “MISWIRING CHECK WIRING Turn the power off, then check to be sure the terminals THEN PWR ON”, turn the power off and ensure that the terminals of the speaker wires are properly insulated. Then, turn the power on again.
What does “PROTECTING SEND SERVICE” mean on Kenwood Car Receiver?
If your Kenwood Car Receiver displays “PROTECTING SEND SERVICE”, send the unit to the nearest service center.
How to fix Kenwood KDC-BT370U when it does not work at all?
If your Kenwood Car Receiver is not working at all, try resetting the unit.
What does “NO DISC” mean on Kenwood KDC-BT370U?
If your Kenwood Car Receiver displays “NO DISC”, insert a playable disc into the loading slot.
What does “UNSUPPORTED DEVICE” mean on Kenwood KDC-BT370U Car Receiver?
If your Kenwood Car Receiver displays “UNSUPPORTED DEVICE”, check that the connected USB device is compatible with the unit and that the file systems are in a supported format. You can also try reattaching the USB device.
What to do if “CH LOCKED LOCK CODE?” appears on Kenwood Car Receiver?
If your Kenwood Car Receiver displays “CH LOCKED LOCK CODE?”, enter the correct pass code to unlock.
Why is my Kenwood Car Receiver showing “CHECK ANTENNA”?
If your Kenwood Car Receiver displays “CHECK ANTENNA”, verify that the antenna and its connection are in good condition.
Why is my Kenwood Car Receiver showing “SWITCHING NG”?
If your Kenwood Car Receiver displays “SWITCHING NG”, it may indicate that the connected phones do not support the phone switching feature.
What to do if “SET ERROR”/“DEL ERROR” appears on Kenwood KDC-BT370U?
If your Kenwood Car Receiver displays “SET ERROR” or “DEL ERROR”, turn the power off, then turn it back on, and perform the operation again.
General| Brand | Kenwood |
|---|---|
| Model | KDC-BT370U |
| Category | Car Receiver |
| Language | English |
Defines user rights and restrictions for using the embedded software.
Outlines conditions for license grant and pertains to software rights.
Addresses licensor's liability and user's responsibility for third-party disputes.
Covers confidentiality, termination clauses, and software destruction.
Details copyright rules and restrictions on exporting the software.
Specific notices and disclaimers related to included software components.
Crucial information for proper use, warnings, and cautions.
Advice on safe operation and avoiding damage.
Identification of unit components and basic operational controls.
Procedures for faceplate handling and unit reset.
How to turn on/off, adjust volume, and select sources.
Setting display language and disabling the demo mode.
Guide to setting the unit's time and date.
Configuring various optional settings and system parameters.
Procedures for updating firmware and managing marine remote IDs.
How to search for, store, and select radio stations.
Using the remote control for direct station frequency tuning.
Configuring TI, PTY, and Time Sync for radio broadcasts.
How to connect media and initiate playback.
Managing playback, track selection, repeat, and random modes.
Using quick search, skip search, and alphabet search for files.
Connecting tuner, activating subscription, and setting parental controls.
Understanding keymodes, smart favorites, and tune scan features.
Adjusting seek mode, channel lock, and signal level settings.
Steps to install, connect, and use the remote application.
Selecting device type and managing app settings.
Connecting Bluetooth devices and microphone.
Handling calls, switching modes, and improving voice quality.
Viewing call logs and phone contacts.
Making calls manually or using voice recognition.
Saving phone numbers to preset buttons for quick access.
Configuring connection modes and performing connectivity tests.
Accessing audio settings and adjusting subwoofer levels.
Adjusting speaker size, fader, balance, and crossover frequencies.
Configuring speaker delay times for optimal sound staging.
Identifying display zones and controlling screen brightness.
Adjusting brightness, colors, text scroll, and clock display.
Steps for connecting and assigning functions to remote keys.
Procedures to reset and reconfigure steering remote functions.
Safety warnings, parts list, and basic installation steps.
Details on in-dash mounting, removal, and wiring connections.
Guide for connecting external devices and amplifiers.
Instructions for cleaning and handling discs.
Information on playable files and compatible devices.
Details on radio program types and changing display content.
Solutions for common problems and radio reception issues.
Troubleshooting playback errors and SiriusXM specific problems.
Resolving problems with Bluetooth pairing, calls, and audio.
Technical details for radio tuner, CD player, and USB interface.
Specifications for Bluetooth, audio output, and general unit parameters.
Details on warranty coverage, limitations, and what is excluded.
Listing of service centers and customer obligations for warranty claims.
