To Next PageTo Next PageWhat does “RATING ERROR” mean on my Kenwood KMM-102 Car Receiver?
If your Kenwood Car Receiver displays “RATING ERROR”, registration of thumbs up/thumbs down has failed due to insufficient network connectivity.
Why is the radio reception poor on my Kenwood KMM-102 Car Receiver?
If you are experiencing poor radio reception with your Kenwood Car Receiver, ensure the antenna is firmly connected.
What to do if there is no sound because Kenwood KMM-102 Car Receiver does not turn on?
If you cannot hear any sound because your Kenwood Car Receiver does not turn on, try resetting the unit.
Why can't I hear sound during playback on my Kenwood Car Receiver?
If you cannot hear sound during playback on your Kenwood Car Receiver, try the following: 1. Reconnect the Android device. 2. If in [HAND MODE], launch any media player application on the Android device and start playback. 3. If in [HAND MODE], relaunch the current media player application or use another media player application. 4. Restart the Android device. If the issue continues, the connected Android device may be unable to route the audio signal to the unit.
What does “PROTECTING SEND SERVICE” mean on my Kenwood KMM-102?
If your Kenwood Car Receiver displays “PROTECTING SEND SERVICE”, send the unit to the nearest service center.
What does “ADD ERROR” mean on my Kenwood KMM-102 Car Receiver?
If your Kenwood Car Receiver displays “ADD ERROR”, new station creation was unsuccessful.
Why are correct characters not displayed on my Kenwood KMM-102 Car Receiver?
Your Kenwood Car Receiver can only display uppercase letters, numbers, and a limited number of symbols.
What does “CHECK DEVICE” mean on my Kenwood Car Receiver?
If your Kenwood Car Receiver displays “CHECK DEVICE”, check the Pandora application on your device.
What to do if “NO DEVICE” or “READING” keeps flashing on Kenwood Car Receiver?
If your Kenwood Car Receiver displays “NO DEVICE” or “READING” keeps flashing, try switching off the developer options on your Android device and reconnecting it. If the problem persists, the connected Android device might not support [BROWSE MODE].
What does “iPod ERROR” mean on my Kenwood KMM-102 Car Receiver?
If your Kenwood Car Receiver displays “iPod ERROR”, try reconnecting your iPod. If the error continues, reset the iPod.
General| DIN Size | Single DIN |
|---|---|
| Satellite Radio Ready | No |
| HD Radio | No |
| Faceplate | Detachable |
| Power Output | 50 Watts x 4 Channels |
| Tuner | AM/FM |
| USB Port | Yes |
| Audio Formats Supported | MP3, WMA, FLAC |
| Auxiliary Input | Yes |
Read through this manual before using, observe warnings and cautions.
Do not operate any function that takes attention away from safe driving.
Adjust volume to hear outside sounds; lower volume before playing digital sources.
Identifies main controls and indicators on the unit's front panel.
Explains the remote control layout and its functions.
Instructions on how to replace the remote control battery.
Turn on/off, adjust volume, select sources, change display.
Guide to selecting display language and disabling demo mode.
Instructions for setting the unit's current time and date.
Guide to configuring initial system and audio settings.
Instructions on how to find and tune to radio stations.
How to directly tune to a station using the remote control.
Configuration options for tuner, system, and interface language.
Advanced radio settings like Local Seek, Auto Memory, Mono Set.
Setting clock synchronization with Radio Data System.
Searching for radio stations by program type.
How to begin playback from USB, iPod, or Android devices.
Location and connection of the USB input port.
Instructions for connecting and using iPod/iPhone devices.
Instructions for connecting and using Android devices.
Choose control between unit or device for iPod/Android.
Selecting the storage drive for music playback.
Navigating and selecting files or folders for playback.
Methods for quickly searching through music files.
Searching for iPod files by the first character.
Searching for music directly using the remote control.
Using unit with streaming radio apps via connected iPod/iPhone.
Setup and listening instructions for the Pandora application.
Additional settings for USB playback like drive change.
How to create and store new Pandora radio stations.
Finding previously saved Pandora stations.
How to bookmark songs played via Pandora.
Instructions for removing stored Pandora stations.
Steps to prepare for using the AUX input.
How to connect and play audio from an auxiliary device.
Customizing the name displayed for the AUX input.
Selecting predefined equalizer settings for different music genres.
Adjusting the bass boost level for preferred sound.
Enhancing low/high frequencies for balanced sound at low volumes.
Enabling and configuring subwoofer output and filters.
Adjusting sound balance between front/rear and left/right speakers.
Setting default volume levels for different sources.
Enhancing sound quality by compensating audio compression.
Adjusting display brightness and dimmer settings.
Setting automatic on/off times for the dimmer.
Selecting preferred brightness level for display illumination.
Configuring how text information scrolls on the display.
Troubleshooting common issues like no sound or wiring errors.
Solutions for radio reception problems and static noise.
Troubleshooting common issues with USB and iPod devices.
Specific solutions for "NA DEVICE", "NO MUSIC", "iPod ERROR".
Troubleshooting Android connection and playback issues.
Solutions for Pandora application errors and connectivity issues.
How the unit handles phone calls and audio muting.
Instructions for cleaning the unit and its connectors.
Links to websites for firmware updates and further details.
Details on playable audio files and USB device compatibility.
Compatibility and usage notes for iPod and iPhone devices.
Compatibility and usage notes for Android devices.
Information regarding Pandora service availability and limitations.
How display info changes with each press of the DISP button.
Important safety warnings regarding power supply and wiring.
Safety advice on installation, handling hot parts, and wiring connections.
Step-by-step guide for installing the unit.
Detailed steps for installing the unit into a dashboard.
Instructions for installation when the mounting sleeve is not used.
List of components included for the unit's installation.
Steps to safely detach and remove the unit from the dashboard.
Diagram and instructions for connecting the unit's wiring harness.
Recommendation to use professional installation with a custom wiring harness.
Specific connection advice for external amplifiers.
Technical specifications for FM radio reception.
Technical specifications for AM radio reception.
Technical specifications for USB connectivity and playback.
Technical specifications for audio output, impedance, and tone controls.
Technical specifications for the auxiliary input.
General specifications including operating voltage and dimensions.
