To Next Page
R
reneetuckerSep 14, 2025
What does “NO INFO” mean on my Kenwood Receiver?
- MMichelle GeorgeSep 14, 2025
If your Kenwood Receiver displays “NO INFO” or “NO DATA”, the Bluetooth device cannot get the contact information.
What does “NO INFO” mean on my Kenwood Receiver?
If your Kenwood Receiver displays “NO INFO” or “NO DATA”, the Bluetooth device cannot get the contact information.
How to improve radio reception on Kenwood Receiver?
To improve poor radio reception on your Kenwood Receiver, ensure the antenna is firmly connected.
What to do if Kenwood Receiver doesn't detect Bluetooth device?
If your Kenwood Receiver isn't detecting any Bluetooth devices, try searching from the Bluetooth device again. If that doesn't work, reset the unit.
Why is Bluetooth audio skipping on my Kenwood Receiver?
If the sound is being interrupted or skipping during Bluetooth playback on your Kenwood Receiver, try reducing the distance between the unit and the Bluetooth audio player. You can also try turning the unit off and on again. Also, check for other Bluetooth devices that might be trying to connect to the unit.
What does “SWITCHING NG” mean on my Kenwood Receiver?
If your Kenwood Receiver displays “SWITCHING NG”, the connected phones might not support the phone switching feature.
Why does “LOADING” appear on my Kenwood Receiver?
If “LOADING” appears when you enter search mode on your Kenwood Receiver, the unit is still preparing the iPod/iPhone music list. It may take some time to load, so try again later.
How to enable playback at [BROWSE MODE] on Kenwood Receiver?
To enable playback in [BROWSE MODE] on your Kenwood Receiver, ensure that the KENWOOD MUSIC PLAY APP is installed on the Android device. Also, reconnect the Android device and select the appropriate control mode. If problems persist, the connected Android device might not support [BROWSE MODE].
What does “UNRESPONSIVE DEVICE” mean on my Kenwood Receiver?
If your Kenwood Receiver displays “UNRESPONSIVE DEVICE”, make sure the device is not malfunctioning and reattach the device.
Why does “NO DEVICE” or “READING” keep flashing on my Kenwood Receiver?
If your Kenwood Receiver displays “NO DEVICE” or “READING” keeps flashing, switch off the developer options on the Android device and reconnect the Android device. If this does not solve the problem, the connected Android device does not support [BROWSE MODE].
What does “iPod ERROR” mean on my Kenwood Receiver?
If your Kenwood Receiver displays “iPod ERROR”, try reconnecting the iPod or resetting it.
Key points for proper use, safety warnings, and cautions.
Overview of the unit's faceplate, buttons, and indicators.
Guide for setting language, clock, date, and initial parameters.
How to connect devices and start audio playback via USB.
Steps to set up and play music from Spotify via USB or Bluetooth.
Steps to connect a Bluetooth device for the first time.
Adjusting subwoofer level, manual EQ, bass extend, and Q factor.
Setting speaker positions, distance, gain, and car type for DTA.
Solutions for sound, power, display, and radio reception problems.
Troubleshooting connection and playback issues with USB devices.
Resolving issues with Android devices and Spotify application.
Solutions for Bluetooth detection, pairing, and audio playback problems.
Safety precautions and professional advice for installation and wiring.
Guidance on connecting wiring harnesses and ISO connectors.
Detailed technical specs for FM, MW, LW tuners and USB interface.
Technical specs for audio output, EQ bands, and Bluetooth features.
General| Power Output | 50W x 4 |
|---|---|
| Tuner | FM/AM |
| Bluetooth | Yes |
| USB Input | Yes |
| Aux Input | Yes |
| Pre-out Level | 2.5V |
| MP3 playback | Yes |
| WMA playback | Yes |
| FLAC playback | Yes |
| Remote Control | Optional |
| Display Type | LCD |
| DIN Size | 1 DIN |
| Compatible Audio Formats | MP3, WMA, FLAC |
| Steering Wheel Control | Yes |
