To Next Page
K
kelsey03Sep 23, 2025
What does 'NO INFO' or 'NO DATA' mean on Kenwood KMM-BT203 Receiver?
- BBrandon StoneSep 23, 2025
If your Kenwood Receiver displays “NO INFO” or “NO DATA”, the Bluetooth device cannot get the contact information.
What does 'NO INFO' or 'NO DATA' mean on Kenwood KMM-BT203 Receiver?
If your Kenwood Receiver displays “NO INFO” or “NO DATA”, the Bluetooth device cannot get the contact information.
Why is Bluetooth audio skipping on my Kenwood KMM-BT203?
If the sound is interrupted or skipped during Bluetooth playback on your Kenwood Receiver, try these steps: first, reduce the distance between the unit and the Bluetooth audio player. Second, turn off and then turn on the unit and try reconnecting. Also, ensure that other Bluetooth devices are not attempting to connect to the unit. Finally, verify that the connected Bluetooth audio player supports Audio/Video Remote Control Profile (AVRCP), and try disconnecting and reconnecting the Bluetooth player.
Why is the phone sound quality poor on my Kenwood KMM-BT203 Receiver?
If the phone sound quality is poor on your Kenwood Receiver, try reducing the distance between the unit and the Bluetooth device. Additionally, move the car to a location with better signal reception.
How to stop echo during calls on Kenwood Receiver?
If you experience echo or noise during phone conversations using your Kenwood Receiver, adjust the microphone unit’s position. Also, check the [ECHO CANCEL] setting.
What to do if Kenwood KMM-BT203 doesn't detect Bluetooth device?
If your Kenwood Receiver is not detecting any Bluetooth devices, try searching from the Bluetooth device again. If that doesn't work, reset the unit.
What does 'N/A VOICE TAG' mean on Kenwood KMM-BT203 Receiver?
If your Kenwood Receiver displays “N/A VOICE TAG”, make sure the same voice as the registered voice tag is used.
What to do if Kenwood Receiver says 'DEVICE FULL'?
If your Kenwood Receiver displays “DEVICE FULL”, retry after deleting an unnecessary device.
Why does 'READING' keep flashing on my Kenwood KMM-BT203?
If your Kenwood Receiver displays “READING” keeps flashing, do not use too many hierarchical levels or folders.
Why does the sound skip on my Kenwood KMM-BT203 Receiver?
If playback is intermittent or the sound skips on your Kenwood Receiver, turn off the power saving mode on the Android device.
How to resolve 'READ ERROR' on Kenwood KMM-BT203 Receiver?
If your Kenwood Receiver displays a “READ ERROR”, copy the files and folders onto the USB device again. If the issue persists, reset the USB device or try using another USB device.
Crucial warnings and cautions for safe and correct product operation.
Alerts users to avoid distractions from operating functions while driving.
Advice on volume, external devices, data backup, and preventing short circuits.
Steps for first-time setup, including language selection and demonstration mode.
How to play, pause, skip tracks, and manage playback modes for connected devices.
Step-by-step guide to connect smartphones and audio devices wirelessly.
Handling incoming calls, making calls, and adjusting volume during conversations.
Connecting and controlling music playback from Bluetooth audio devices.
Solutions for common issues like power, wiring, and general operation failures.
Resolving issues with USB, iPod, and Android device recognition and playback.
Addressing problems with pairing, call quality, and audio streaming via Bluetooth.
Essential safety precautions and warnings before installing the unit.
Comprehensive instructions for physically mounting the unit in a vehicle.
Diagrams and explanations for correctly connecting the unit's wiring.
General| Operating temperature (T-T) | -10 - 60 °C |
|---|---|
| Menu languages | DEU, ENG, RUS |
| Output voltage | 14.4 V |
| File format system | FAT 12/16/32 |
| Power requirements | 14.4 V DC, 10 A |
| Key illumination color | Red |
| Number of optical discs | 1 discs |
| MP3 playback | Yes |
| CD-R playback | - |
| Audio formats supported | AAC, FLAC, MP3, WAV, WMA |
| DIN size | 1 DIN |
| Output power | 50 W |
| RDS features | EON |
| Product color | Black |
| Volume control | Rotary |
| Frequency range | 20 - 20000 Hz |
| Audio output channels | 4.0 channels |
| Equalizer bands quantity | 13 |
| Mobile operating systems supported | Android, iOS |
| AM band range | 531 - 1611 kHz |
| FM band range | 87.5 - 108 MHz |
| LW band range | 153 - 279 kHz |
| Supported radio bands | AM, FM |
| Preset stations quantity | 24 |
| Display type | LCD |
| Display digits | 13 digits |
| Illumination color | White |
| USB version | 2.0 |
| Bluetooth version | 3.0+HS |
| Bluetooth profiles | A2DP, AVRCP, HFP, PBAP, SPP |
| USB ports quantity | 1 |
| Bluetooth functions | Audiostreaming, Handsfree calling |
| Cables included | DC |
Weight and Dimensions| Weight | 700 g |
|---|---|
| Dimensions (WxDxH) | 182 x 114 x 53 mm |
