To Next PageTo Next PageWhat does 'SET ERROR' mean on my Kenwood KMM-BT228U Car Receiver?
If your Kenwood Car Receiver displays “SET ERROR” or “DEL ERROR”, turn the power off, then turn on the power and perform the operation again.
Why is Bluetooth pairing failing on my Kenwood Car Receiver?
If you are having trouble pairing a Bluetooth device with your Kenwood Car Receiver, ensure that you have entered the same PIN code on both devices. If pairing continues to fail, delete the pairing information from both the unit and the Bluetooth device, and then attempt the pairing process again.
What does 'Memory Full' mean on my Kenwood KMM-BT228U?
If your Kenwood Car Receiver displays “MEMORY FULL”, you have reached the maximum storage limit of your iPod/iPhone.
What to do if my Kenwood Car Receiver does not work at all?
If your Kenwood Car Receiver is not working at all, try resetting the unit.
Why won't my Kenwood KMM-BT228U switch to USB source?
If your Kenwood Car Receiver does not switch to the USB source when you connect a USB device, turn the power off, unplug the USB device, then turn the power back on and reattach the USB device. If this does not solve the problem, turn the power off and reset the unit before trying another USB device.
Why can't I control Bluetooth player from Kenwood Car Receiver?
If the connected Bluetooth audio player cannot be controlled with your Kenwood Car Receiver, check whether the connected Bluetooth audio player supports Audio/Video Remote Control Profile (AVRCP). You can also try disconnecting and reconnecting the Bluetooth player.
What does 'No Music' mean on my Kenwood KMM-BT228U?
If your Kenwood Car Receiver displays “NO MUSIC”, connect a device (USB/iPod/iPhone) that contains playable audio files.
What does 'iPod ERROR' mean on my Kenwood KMM-BT228U?
If your Kenwood Car Receiver displays “iPod ERROR”, try reconnecting the iPod or resetting the iPod.
What does 'Unresponsive Device' mean on Kenwood KMM-BT228U Car Receiver?
If your Kenwood Car Receiver displays “UNRESPONSIVE DEVICE”, make sure the USB device is not malfunctioning and reattach the USB device.
What does 'No Device' mean on my Kenwood KMM-BT228U Car Receiver?
If your Kenwood Car Receiver displays “NO DEVICE”, connect a device (USB/iPod/iPhone), and change the source to USB or iPod FRONT/iPod REAR/iPod USB again.
General| Brand | Kenwood |
|---|---|
| Model | KMM-BT228U |
| Category | Car Receiver |
| Language | English |
Setting the display language and disabling the demonstration mode.
Steps to set the unit's current time and date.
Configuring the date format and inputting the date.
How to search, tune, and select HD Radio stations and multicast channels.
Activating and receiving emergency broadcast alerts.
Steps for connecting USB drives and iPod/iPhone for playback.
Preparing and starting playback of Pandora streams.
Connecting the tuner, checking ID, and activating subscription.
Starting SiriusXM service and navigating available channels.
Controlling the receiver using the KENWOOD Remote mobile application.
Initial setup, pairing, and configuration for Amazon Alexa.
Adjusting manual EQ, easy EQ, and sound effects.
Optimizing speaker timing for better sound staging.
List of parts and step-by-step instructions for mounting the unit.
Detailed guide for correctly connecting the unit's wiring harness.
Solutions for common sound, power, and radio reception problems.
Resolving issues with USB/iPod connectivity and Pandora application.
Solutions for issues with Spotify, SiriusXM, and Bluetooth connectivity.
Resolving problems with Amazon Alexa voice commands and connectivity.
