To Next Page
C
Christina MartinezAug 17, 2025
What does “DEVICE FULL” mean on my Kenwood Car Receiver?
- Ddustin27Aug 17, 2025
If “DEVICE FULL” appears on your Kenwood Car Receiver, the number of registered devices has reached its limit. Retry.
What does “DEVICE FULL” mean on my Kenwood Car Receiver?
If “DEVICE FULL” appears on your Kenwood Car Receiver, the number of registered devices has reached its limit. Retry.
Why is there no sound coming from my Kenwood KMM-X50BT Car Receiver?
If you cannot hear any sound from your Kenwood Car Receiver, ensure that the volume is at an audible level. Also, verify that all cords and connections are properly connected.
What to do if the sound is being interrupted during Bluetooth playback on Kenwood KMM-X50BT Car Receiver?
If the sound is interrupted or skipped during Bluetooth audio playback on your Kenwood Car Receiver, try the following: * Reduce the distance between the unit and the Bluetooth audio player. * Turn off, then turn on the unit and try to connect again. * Ensure that other Bluetooth devices are not trying to connect to the unit.
How to fix echo or noise occurring with my Kenwood KMM-X50BT Car Receiver?
If you are experiencing echo or noise with your Kenwood Car Receiver, adjust the microphone unit’s position. Also, check the [ECHO CANCEL] setting.
Why is the phone sound quality poor on my Kenwood KMM-X50BT?
If the phone sound quality is poor on your Kenwood Car Receiver, reduce the distance between the unit and the Bluetooth device. Alternatively, move the car to a place where you can get better signal reception.
What does “COPY PRO” mean on my Kenwood KMM-X50BT Car Receiver?
If “COPY PRO” appears on your Kenwood Car Receiver, it indicates that a copy-protected file is being played.
Why does “READING” keep flashing on my Kenwood KMM-X50BT?
If “READING” keeps flashing on your Kenwood Car Receiver, do not use too many hierarchical levels or folders.
What does “NOT SUPPORT” mean on my Kenwood KMM-X50BT?
If “NOT SUPPORT” appears on your Kenwood Car Receiver, it means the connected phone does not support the Voice Recognition feature.
What does “NO ENTRY” mean on my Kenwood KMM-X50BT Car Receiver?
If “NO ENTRY” appears on your Kenwood Car Receiver, there is no registered device connected/found via Bluetooth.
What does “NO PAIR” mean on my Kenwood KMM-X50BT Car Receiver?
If “NO PAIR” appears on your Kenwood Car Receiver, there is no registered device connected/found via Bluetooth.
General| Bluetooth | Yes |
|---|---|
| Tuner | FM/AM |
| Display Type | LCD |
| Equalizer | 13-band graphic equalizer |
| DIN Size | 1 DIN |
| AUX Input | Yes |
| Preamp Outputs | 3 (front, rear, subwoofer) |
| Subwoofer Control | Yes |
| Built-in Microphone | Yes |
| Audio Formats Supported | MP3, WMA, AAC |
| Dimensions | 178mm x 50mm x 159mm |
| Faceplate Security | Detachable |
| RMS Power Output | 22W x 4 |
| Peak Output | 4 x 50W |
| Remote Control | Optional |
| Steering Wheel Control | Yes |
| USB Port | Yes, Front |
