Need help?Do you have a question about the Kenwood KR-A50 and is the answer not in the manual?
General| Frequency Response | 20Hz to 20kHz |
|---|---|
| Tuning Range | FM, MW |
| Dimensions | 440 x 127 x 300mm |
| Weight | 6.8kg |
| Total Harmonic Distortion | 0.08% |
| Input Sensitivity (MM) | 2.5mV |
| Power Output | 50 watts per channel into 8Ω (stereo) |
| Total Harmonic Distortion (THD) | 0.08% |
| Speaker load impedance | 8Ω to 16Ω |
Do not remove cabinet or touch internal parts; refer service to qualified personnel.
Grasp plug body to insert/remove; avoid stretching or sharp bends.
Install on flat surface, avoid heat/sunlight, maintain ambient temp, avoid dust/moisture.
Do not remove cover; refer servicing to qualified personnel for user-serviceable parts.
Buttons and switches for memorizing and recalling preset stations.
Guide to tuning FM/AM/MW/LW stations using auto or manual methods.
Detailed specifications for power output, distortion, and input sensitivity.
Specifications for FM reception sensitivity, selectivity, and stereo separation.
Specifications for AM reception sensitivity, selectivity, and image rejection.
To Next Page
