Need help?Do you have a question about the Kenwood P-110 and is the answer not in the manual?
Motor and Turntable| drive system | Belt-drive system |
|---|---|
| motor | DC servo motor |
| turntable platter diameter | 29.5 cm |
Speeds and Performance| speeds | 2 speeds; 33-1/3 and 45 rpm |
|---|---|
| wow & flutter | Less than 0.05 % (WRMS) |
| signal-to-noise ratio (rumble) | 65 dB (DIN B) |
Tonearm and Cartridge| tonearm type | Integrated straight tonearm |
|---|---|
| effective arm length | 215 mm (8-7/16") |
| cartridge type | MM type |
Cartridge Specifications| stylus | N-76 with 0.6 mill diamond |
|---|---|
| frequency response | 20 Hz to 20 kHz |
| output voltage | 2.5 mV (1kHz, 3.54 cm/sec.) |
General Specifications| power consumption | 4 W |
|---|---|
| dimensions | W: 400 mm (15-3/4") H : 103 mm (4-1/16") D : 380 mm (14-15/16") |
| weight | 3.0 kg (6, 6lb) |
Setting the voltage selector switch to match your line voltage before connecting to the outlet.
Connect to specified power supply and protect the power cord from damage.
Using the polarized plug correctly and ensuring proper unit ventilation.
Prevent electric shock, unauthorized enclosure removal, and magnetic field interference.
Procedures for abnormal smells, smoke, or unit malfunction requiring service.
To Next Page
