Why can't I pair my Bluetooth device with Kenwood Receiver?
If Bluetooth pairing cannot be made, make sure you have entered the same PIN code on both the unit and the Bluetooth device. If that doesn't work, delete pairing information from both devices and perform pairing again.
How to fix no device or reading flashing on Kenwood Receiver?
To resolve the 'NO DEVICE or READING keeps flashing' error, switch off the developer options on the Android device. If that doesn't work, reconnect the Android device. Note that the connected Android device may not support BROWSE MODE.
What does Android error mean on Kenwood Pandora KMM-BT303 Receiver?
If you see 'ANDROID ERROR/ NA DEVICE', try reconnecting the Android device. If the issue persists, restart the Android device.
How to fix echo during phone calls with Kenwood Pandora KMM-BT303?
If you're experiencing echo or noise during a phone conversation, try adjusting the microphone unit’s position. You can also check the ECHO CANCEL setting.
What to do if playback is intermittent on Kenwood Pandora KMM-BT303 Receiver?
If you are experiencing intermittent playback or sound skipping, try turning off the power saving mode on your Android device.
Why is phone sound quality poor on my Kenwood Receiver?
To resolve the issue of poor phone sound quality, try reducing the distance between the unit and the Bluetooth device. If that doesn't work, move the car to a location with better signal reception.
How to fix sound not working on my Kenwood Pandora KMM-BT303 Receiver?
If sound cannot be heard, first, adjust the volume to the optimum level. Also, check the cords and connections to ensure they are properly connected.
What to do if Kenwood Pandora KMM-BT303 Receiver says 'protecting send service'?
If you see 'PROTECTING SEND SERVICE', send the unit to the nearest service center.
What does no music mean on Kenwood Pandora KMM-BT303 Receiver?
If you see 'NO MUSIC', connect a USB device that contains playable audio files.
What does no device mean on Kenwood Pandora KMM-BT303 Receiver?
If you see 'NO DEVICE', connect a USB device and change the source to USB again.
General| Category | Receiver |
|---|---|
| Model | KMM-BT303 |
| Bluetooth | Yes |
| USB Input | Yes |
| AUX Input | Yes |
| Pandora | Yes |
| Radio Tuner | FM/AM |
| Display Type | LCD |
| EQ | 13-Band Graphic EQ |
| Built-in Microphone | Yes |
| Steering Wheel Control | Yes |
| Weight | 1.2 kg |
| Power Output | 4 x 50W |
| Compatible Formats | MP3, WMA, AAC, WAV, FLAC |
Read this manual before using the product for proper use. Keep it in a safe place.
Avoid distracting functions, battery hazards, and heed volume/usage cautions.
Identifies main unit components, remote controls, and battery replacement.
Steps to select display language, cancel demo, and set clock/date.
Configuring basic system parameters, including crossover type and audio settings.
Options for display illumination, clock, tuner presets, and system settings.
Enabling sources (Pandora, AUX), updating firmware, and factory reset.
Steps to choose between 2-way and 3-way crossover for audio tuning.
Methods to find radio stations manually, automatically, or directly via frequency.
Configuring LOCAL SEEK, AUTO MEMORY, MONO SET, NEWS SET, REGIONAL, AF SET, TI.
Steps to connect a portable player via AUX and start playback.
Searching radio by program type and synchronizing unit time with RDS.
Connecting devices and controlling playback functions like pause, skip, and repeat.
Browsing music by folder, file, or using search features.
Switching control modes and selecting USB music drives for playback.
Using quick search, skip search, and alphabet search for efficient music browsing.
Direct music search via remote and setting up the KENWOOD Remote application.
Steps to prepare, connect, and start listening to Pandora via USB.
Creating, saving, searching, and deleting Pandora stations via the unit.
Supported Bluetooth profiles, codecs, and microphone connection instructions.
Step-by-step guide to pair a Bluetooth device for the first time and auto-pairing.
How the unit indicates and handles incoming calls during Bluetooth connection.
Adjusting MIC GAIN, NR LEVEL, and ECHO CANCEL for better call quality.
Managing active calls, accepting/rejecting new calls, and adjusting volume.
Configuring auto answer, battery/signal display, and accessing the phone book.
Methods for making calls via call history, phone book, or direct dialing.
Using voice commands for calls and making calls from memory.
Managing Bluetooth modes, device selection, deletion, and PIN code editing.
Settings for reconnection, auto-pairing, initializing, and playing audio via Bluetooth.
Procedure to check Bluetooth profile compatibility between the unit and device.
Setting up the KENWOOD Remote application for iOS and Android devices.
Listening to iPhone/iPod and Pandora via Bluetooth connection.
Adjusting subwoofer, manual EQ, bass boost, loudness, and sound effects.
Configuring speaker balance, sound stage, and initial volume levels.
Explanation of 2-way and 3-way crossover settings and their impact.
Selecting speaker sizes and adjusting crossover frequency, slope, phase, and gain.
Specific parameters for configuring 3-way crossover audio setups.
Configuring DTA settings like Position, Distance, Gain, and DTA RESET for optimal sound.
Guide to measuring speaker distances for DTA and adjusting display dimmer.
Adjusting display brightness, text scroll, and color selection for zones.
Setting colors, brightness, and text scroll behavior for the display.
Resolving common issues with sound, wiring, power, and display information.
Troubleshooting common errors and connection problems for USB, iPod, and Android devices.
Resolving issues with Pandora playback, stations, and connection errors.
Troubleshooting Bluetooth pairing, detection, and voice call issues.
Resolving problems with audio playback interruptions and device control via Bluetooth.
Details on playable files, USB devices, iPod/iPhone, Android, Pandora, and Bluetooth compatibility.
Instructions for cleaning the unit and finding more information online.
Changing display info and important safety warnings for installation.
Step-by-step guide for the installation process and essential precautions.
Step-by-step visual guide for installing the unit into a dashboard mount.
Installing without a sleeve and how to remove the unit from the dashboard.
List of components included for the installation process.
Detailed guide for connecting power, speakers, antenna, and microphone.
Detailed technical specs for FM, AM, and SW radio reception.
Technical specs for USB playback and auxiliary input.
Technical specs for Bluetooth version, frequency, and profiles.
Specifications for output power, speaker impedance, and tone controls.
Specs like voltage, current, temperature range, dimensions, and weight.
To Next Page
