What to do if Kenwood Dash Cameras display indicates an SD card error?
If your Kenwood Dash Cameras display shows an SD card error, make sure the SD card is correctly inserted. If the error continues, format the SD card or replace it with a new one.
What to do if my Kenwood Digital Camera says SD card error?
If your Kenwood Digital Camera display indicates an SD card error, ensure the SD card is correctly inserted. If the error persists, format the SD card or replace it with a new one.
What does GPS error mean on Kenwood Digital Camera?
If your Kenwood Digital Camera displays a GPS error, the in-line connector for the GPS device may be disconnected. Check the connection of the in-line connectors.
Why is video from rear camera not recording on Kenwood Dash Cameras?
If the video from the rear camera is not recording on your Kenwood Dash Cameras, set the rear camera to ON.
What to do if event recording does not work on Kenwood Dash Cameras?
If event recording is not working on your Kenwood Dash Cameras, gradually increase the impact notification sensitivity setting and check again.
What does GPS error mean on Kenwood Dash Cameras?
If the display indicates a GPS error on your Kenwood Dash Cameras, check the connections of the in-line connectors.
Why is my Kenwood Digital Camera not recording rear video?
If video from the rear camera is not recording on your Kenwood Digital Camera, ensure that the rear camera is set to ON.
How to calibrate G-sensor on Kenwood Digital Camera?
If the G-sensor does not match vehicle movement (up/down, forward/ backward, left/right) on your Kenwood Digital Camera, ensure the unit is oriented (X, Y, Z) to the vehicle’s longitudinal, lateral, and vertical axes. Align the main unit and vehicle axes as best as you can. Note: This will not affect impact notification sensitivity.
What to do if Kenwood Dash Cameras display shows camera not connected error?
If the display on your Kenwood Dash Cameras indicates that the camera is not connected while adjusting the recording angle, check the connections of the in-line connectors.
Why can't I connect to my Kenwood Digital Camera via Wi-Fi?
If your cell phone won’t connect to the unit over a wireless LAN connection, ensure that the password was entered correctly. Reset the wireless LAN password using the Motorsports CAM App and enter the default password, “12341234.”
User is prompted to record serial number for future reference.
Describes warning symbols used in the manual.
Details precautions for installing the unit safely.
Specific advice for installing the unit to prevent issues.
Guidelines for operating the unit safely and correctly.
Instructions on how to clean and maintain the device.
Lists recommended SD card types, capacities, and speed classes.
Provides essential advice for using SD cards with the unit.
Information on radio frequency energy and compliance with FCC rules.
Compliance information for Canada's radio standards.
Details about the product's conformity to standards.
Lists all components that should be in the box.
Identifies and explains the purpose of each component.
Step-by-step instructions for managing the SD card.
Details the physical installation process for the main unit.
Guidance on positioning the GPS antenna for optimal reception.
Instructions for mounting the control switch.
Steps for mounting the front and rear cameras.
Wiring instructions for connecting the unit to the vehicle's power.
Guidelines for connecting and routing various cables safely.
How to turn the device on and off.
Explains continuous, event, and manual recording modes.
How recorded data is stored and managed on the SD card.
Options for enabling or disabling audio recording.
Explains the meaning of different LED light patterns.
Steps to download and install the mobile application.
Guide for establishing a Wi-Fi connection between phone and unit.
How to physically adjust and set the camera's viewing angle.
Steps for setting up the desktop software.
Instructions for updating the device's internal software.
Addresses problems like no power, blinking LEDs, and card errors.
Solutions for unclear video and swapped camera feeds.
Troubleshooting for Wi-Fi, app connection, and GPS data.
Technical details about the wireless connectivity.
Recommendations for securing the wireless connection.
Information on potential interference.
Details on GPS/GLONASS signal reception.
Legal information about trademarks and software licenses.
Explains how video files are organized on the SD card.
Provides estimated recording durations based on SD card size.
Indicates how many event/manual recordings can be stored.
Details on the software licenses used in the product.
Comprehensive technical details of the main unit, cameras, GPS, etc.
Supported operating systems for viewing software.
Dimensions and weight of various components.
Recommended operating temperature range.
Details the warranty terms for Canada.
Lists items not covered by the warranty.
Procedure for getting repairs under warranty.
Specific warranty terms for these regions.
Specific warranty terms for the USA.
Defines the scope of the US warranty.
Procedure for requesting service in the US.
General| Frame Rate | 30fps |
|---|---|
| GPS | Yes |
| G-Sensor | Yes |
| HDR | Yes |
| Parking Mode | Yes |
| Wi-Fi | Yes |
| Loop Recording | Yes |
| Night Vision | Yes |
| SD Card Support | Up to 128GB |
| Storage | microSD card |
To Next Page
