Kenwood TK-260G User Manual

©B62-1129-10(K)(MC)
09 08 07 06 05 04 03 02 01 00
VHF FM TRANSCEIVER/
UHF FM TRANSCEIVER
INSTRUCTION MANUAL
MANUAL DE INSTRUCCIONES
TRANSCEPTOR DE FM VHF/
TRANSCEPTOR DE FM UHF
KENWOOD CORPORATION
TK-260G/TK-360G

Kenwood TK-260G Specifications

General

Frequency Range	136-174 MHz
Number of Channels	16
Power Output	5 W
Operating Temperature	-30°C to +60°C
Channel Spacing	25 kHz / 12.5 kHz
Battery Life	Up to 8 hours
Weight	360 g
Operating Voltage	7.5 V

Summary

Models Covered by This Manual

Notices to the User

Precautions

Thank You!

Unpacking and Checking Equipment

Supplied Accessories

Preparation

Installing/Removing the Optional Battery Pack

Instructions for attaching and detaching the optional battery pack to the transceiver.

Installing the Antenna

Installing the Cap Over the Speaker-Mic Jacks

Installing the Speaker-Microphone

Installing the Belt Hook

Getting Acquainted

Antenna Connector

Connect the supplied antenna to this connector.

LED Indicator

Explains the function and colors of the LED indicator during operation.

Channel Selector

How to use the channel selector to choose channels from 1 to 4.

Power/Vol Control

Instructions for turning the transceiver ON/OFF and adjusting volume.

PTT (Push-to-Talk) Switch

How to use the PTT switch to speak into the microphone.

MONI Button

Function of the MONI button for monitoring activity and muting the speaker.

Speaker-Microphone Jacks

Location where a speaker-microphone can be connected.

Receiving

Calling

Time-Out Timer (TOT)

Busy Channel Lockout

Battery Voltage Level

Channel Chart