Need help?Do you have a question about the Kenwood TK-290 and is the answer not in the manual?
General Specifications| frequency range | 136 to 174MHz |
|---|---|
| number of channels | 160 channels |
| channel spacing | Wide : 25kHz, 30kHz, Narrow : 12.5kHz, 25kHz |
Battery| battery voltage | 7.5V DC ± 20% |
|---|---|
| battery life | 10 hours at 5W (5-5-90 duty cycle) |
| battery temperature range | –30°C to +60°C (–22°F to +140°F) |
Receiver Specifications| sensitivity EIA 12dB SINAD | 0.25µV |
|---|---|
| 20dB quieting | 0.35µV |
| selectivity | Wide : –75dB, Narrow : –70dB |
Transmitter Specifications| RF power output | Hi : 5W, Low : 1W |
|---|---|
| spurious and harmonics | –70dB |
| type of emission | F3E, ± 5kHz for 100% at 1000Hz |
Weight and Dimensions| dimensions | 155mm H x 58mm W x 38mm D |
|---|---|
| weight | 1.25 lbs (565g) |
| dimensions with keypad model | 155mm H x 58mm W x 39.5mm D |
Critical safety warnings on unlicensed operation and service referrals.
Potential RF interference from modifications and operating instructions.
Detailed descriptions of each key, switch, and indicator on the transceiver.
Explanation of the information shown on the transceiver's displays.
How to select channels, adjust squelch, and initiate calls.
To Next Page
