Need help?Do you have a question about the Kenwood TK-705 and is the answer not in the manual?
General| Power Output | 5W (VHF), 4W (UHF) |
|---|---|
| Dimensions | 130 x 57.5 x 37.5 mm (without antenna) |
| Weight | 360 g (with KNB-14 battery) |
| IP Rating | IP54 |
| Frequency Range | 136-174 MHz |
| Frequency | 136-174 MHz |
Crucial safety precautions for operating and servicing the radio equipment.
Detailed instructions for physically installing the KQT-8 unit into the radio.
How to set the time limit for automatic receive state return.
Configuration for inhibiting transmission when channel is busy.
Method for changing the PLL channel step frequency between 5kHz and 6.25kHz.
How to select functions I or II for frequency and signaling data writing.
Detailed instructions for Clone, Customer Use, and Service modes.
Detailed steps and diagrams for safely removing the front panel assembly.
Lists required test equipment and target frequencies for alignment.
Steps for setting, PLL, and transmit frequency adjustments.
Procedures for APC, deviation, MIC, and protection adjustments.
Comprehensive technical specifications for the radio's performance and features.
To Next Page