Need help?Do you have a question about the Kenwood TK-790H and is the answer not in the manual?
General| Brand | Kenwood |
|---|---|
| Model | TK-790H |
| Category | Transceiver |
| Language | English |
Covers hazards like explosive atmospheres, RF transmissions, dynamite caps, and FCC compliance rules.
Lists all items included with the transceiver for unpacking and verification.
Specifies the tools and drill bit sizes needed for transceiver installation.
Provides steps for connecting the transceiver's power cable to the vehicle's battery.
Details how to mount the bracket, attach the transceiver, and connect cables.
Explains how to mount the microphone hanger for easy access.
Identifies and explains the function of buttons and controls on the basic front panel.
Explains the functions of the power switch, group/channel controls, and programmable function keys.
Details the meaning of indicators like CALL, MON, SCAN, SP, OPT, and Aux status on the display.
Identifies the 9-pin and 25-pin accessory connectors and the power/antenna connectors.
Explains the function of the PTT (Push To Talk) switch on the microphone.
Instructions for switching the transceiver on/off and adjusting audio volume levels.
How to navigate and select different radio groups and channels using controls.
Steps for selecting a channel, using the PTT switch to transmit, and receiving.
Procedures for manually dialing DTMF numbers and redialing the last number.
How to store, confirm, send, and clear DTMF numbers in memory channels.
Explains the TOT function to limit transmission time and BCL to prevent transmitting on busy channels.
Details setting priority channels and how 2-Tone/DTMF signaling works for call reception.
To Next Page
