Need help?Do you have a question about the Kenwood TK-863G and is the answer not in the manual?
Receiver Specifications| sensitivity (12 dB SINAD) wide | 0.28 µV |
|---|---|
| sensitivity (12 dB SINAD) narrow | 0.35 µV |
| selectivity wide | 80 dB |
| selectivity narrow | 65 dB |
| intermodulation distortion wide | 75 dB |
| intermodulation distortion narrow | 63 dB |
| spurious response | 85 dB |
| audio output | 4 W at less than 5% distortion |
Transmitter Specifications| RF power output | 25 W |
|---|---|
| spurious | 65 dB |
| FM noise wide | 50 dB |
| FM noise narrow | 45 dB |
| modulation wide | 16K0F3E |
| modulation narrow | 11K0F3E |
| audio distortion | Less than 3% |
General Specifications| frequency range | 450 ~ 490 MHz |
|---|---|
| number of systems | Max. 32 |
| number of groups | Max. 250 |
| number of channels (conventional mode) | Max. 600 |
| channel spacing wide | 25kHz |
| channel spacing narrow | 12.5kHz |
| channel step | 5kHz, 6.25kHz |
| channel spread | 40 MHz |
| current drain standby | Less than 0.4A |
| current drain receive | Less than 1.0A |
| current drain transmit | Less than 8.0A |
| RF input impedance | 50 Ω |
| operating voltage | 13.6 V DC±20% |
| operating temperature range | -22°F~ +140°F (-30°C ~ +60°C) |
| frequency stability | ±2.5 ppm (-22°F ~ +140°F ) |
| dimensions (W x H x D) | 5.51 x 1.57 x 5.70 in (140 x 40 x 145 mm) |
| weight (net) | 2.07 Ib (940 g) |
| FCC ID | ALH29383110 |
| FCC compliance | FCC parts 22, 74, 90, 95 |
Details the procedure for connecting the transceiver's power cable to the vehicle.
Details how to choose the desired system and group for communication.
Instructions for initiating a dispatch call in trunked mode.
Instructions for receiving dispatch calls in trunked mode.
Steps for making a telephone call using the transceiver.
Instructions for receiving telephone calls on the transceiver.
Guide on how to transmit in conventional operating mode.
Guide on how to receive communications in conventional mode.
To Next Page
