Kenwood TK-862G series User Manual

© B62-1257-20 (M,E)
09 08 07 06 05 04 03 02
KENWOOD CORPORATION
TK-760G series,
TK-762G series/
TK-860G series,
TK-862G series
GEBRUIKSAANWIJZING
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
MODE D’EMPLOI
INSTRUCTION MANUAL
VHF FM TRANSCEIVER/ UHF FM TRANSCEIVER
ÉMETTEUR-RÉCEPTEUR FM VHF/ ÉMETTEUR-RÉCEPTEUR FM UHF
TRANSCEPTOR FM VHF/ TRANSCEPTOR FM UHF
VHF-FM-TRANSCEIVER/ UHF-FM-TRANSCEIVER
VHF FM ZENDONTVANGER/ UHF FM ZENDONTVANGER

Kenwood TK-862G series Specifications

General

Type	Mobile Transceiver
Frequency Range	450-490 MHz
Power Output	25W
Operating Temperature	-30°C to +60°C
Channel Spacing	25 kHz/12.5 kHz
Power Supply	13.8 V DC
Modulation	16K0F3E

Summary

Unpacking and Checking Equipment

Supplied Accessories

Preparation

Tools Required

Specifies necessary tools for transceiver installation.

Power Cable Connection

Details the procedure for connecting the power cable.

Installing the Transceiver

Programmable Auxiliary Functions

Operating Basics

Switching Power On/Off

Explains how to turn the transceiver on and off.

Adjusting the Volume

Details how to control the audio output volume.

Selecting a Group or Channel

Guides on choosing operating channels or groups.

Channel Scan (TK-760G/ TK-860G only)

Priority Scan

DTMF Calls

Manual Dialling

Instructions for manually dialing DTMF numbers.

Storing DTMF Numbers

Guide to saving DTMF numbers in memory.

Dialling Stored DTMF Numbers

Code Squelch

Selective Call (TK-760G/ TK-860G only)

2-Tone Signalling

Receiving

Transmitting

Advanced Operations

Time-Out Timer (TOT)

Busy Channel Lockout (BCL)

SmarTrunk II ® Operation

Programmed Key Settings