13
3
rr
rr
r CALL/A key
Identical to the front panel CALL key. This key can
be reprogrammed if desired {page 59}. Press and
hold Mic [PTT], then press [CALL/A] to transmit A.
tt
tt
t VFO/B key
Identical to the front panel VFO key. This key can be
reprogrammed if desired {page 59}. Press and hold
Mic [PTT], then press [VFO/B] to transmit B.
yy
yy
y MR/C key
Identical to the front panel MR key. This key can be
reprogrammed if desired {page 59}. Press and hold
Mic [PTT], then press [MR/C] to transmit C.
uu
uu
u PF/D key
The default function of this key is 1 MHz step. This
key can be reprogrammed if desired {page 59}.
Press and hold Mic [PTT], then press [PF/D] to
transmit D.
ii
ii
i DTMF keypad
This 16-key keypad is used for DTMF functions
{page 50} or to directly enter an operating frequency
{page 16}, or a Memory Channel number {page 30}.
The keypad can also be used to program a Memory
Channel name, Power-on message, or other
character strings {page 63}.
MIC KEYPAD DIRECT ENTRY
The microphone keypad (keypad models only) allows
you to make various entries depending on which mode
the transceiver is in.
In VFO or Memory Recall mode, use the Mic keypad to
select a frequency {page 16} or Memory Channel
number {page 30}. First press the Mic PF key assigned
the ENTER function {page 59}.
To manually send a DTMF number, press and hold Mic
[PTT], then press the DTMF keys on the Mic keypad
{page 50} in sequence.
You can also use the Mic keypad to program a Memory
Channel name, Power-on message, or other character
strings {page 63}.
To Next Page
Loading...
Need help?
General
