Do you have a question about the Kenwood VR-507 and is the answer not in the manual?
Channels | 5.1 |
---|---|
Tuning range | AM/FM |
Total Harmonic Distortion | 0.7% |
Input Impedance | 47 kOhms |
Digital inputs | 2 Optical, 1 Coaxial |
Video Connections | Composite |
Signal to noise ratio | 95 dB (Line) |
Surround output | Dolby Digital, DTS |
Frequency Response | 10Hz - 100kHz |
Input Sensitivity | 200mV |
Speaker load impedance | 6 ohms |
Power Output (6 ohms) | 100W per channel |
Frequency Response (extended) | 10 Hz to 100 kHz (+0, -3 dB) |
Speaker Impedance | 6 ohms |
Dimensions (mm) | 440 x 158 x 418 mm |
Block diagram detailing the microprocessor's peripheral connections and interfaces.
Detailed pinout and function description for the main microprocessor unit.
Procedures for entering and operating the unit in test mode for diagnostics.
Safety warnings and notes regarding component replacement and DC voltage measurement.
Contact details and addresses for Kenwood service and distribution centers.