Do you have a question about the Kenwood X-SE7 and is the answer not in the manual?
power consumption | 14 W |
---|
frequency response TYPEøtape | 40 Hz to 18, 000 Hz, ±3 dB |
---|---|
frequency response TYPE¿tape | 40 Hz to 19, 000 Hz, ±3 dB |
signal to noise ratio Dolby B NR ON | 67 dB (CrO2 tape) |
signal to noise ratio Dolby C NR ON | 73 dB (CrO2 tape) |
input sensitivity | 77.5 mV |
---|---|
input impedance | 47 kΩ |
output level | 775 mV |
output impedance | 10 kΩ |
width | 200 mm |
---|---|
height | 75 mm |
depth | 249 mm |
weight | 2.2 kg |