Do you have a question about the Kenwood X-W320 and is the answer not in the manual?
| frequency response typeøtape | 40 Hz to 18, 000 Hz, ±3 dB |
|---|---|
| frequency response type¿tape | 40 Hz to 19, 000 Hz, ±3 dB |
| signal to noise ratio dolby NR OFF | 56 dB (IEC, 250 nWb/m, TYPE¿tape) |
| signal to noise ratio dolby B NR ON | 68 dB |
| signal to noise ratio dolby C NR ON | 75 dB (3rd, H.D., 3 %, TYPE¿tape) |
| harmonic distortion | Less than 1.9 % (at 315 Hz, 3rd H.D., 250 nWb/m, TYPE¿tape) |
| input sensitivity/impedance LINE IN | 123 mV/47 kΩ |
|---|---|
| output level/impedance LINE OUT | 775 mV/1.0 kΩ |
| power consumption | 20 W |
|---|---|
| width | 400 mm (15-3/4") |
| height | 141 mm (5-9/16") |
| depth | 390 mm (15-3/8") |
| weight | 4.8 kg (10.6 lb) |