Need help?Do you have a question about the Kenwood XD-980MD and is the answer not in the manual?
Amplifier Section| rated power output | 50 watts per channel minimum RMS at 6 Ω, 1 kHz |
|---|---|
| signal to noise ratio | 85 dB (AUX) |
| input sensitivity / impedance | AUX: 200 mV / 30 kΩ, MIC 1, 2: 3.0 mV / 22 kΩ |
Tuner Section| FM tuning frequency range | 87.5 MHz ~ 108 MHz |
|---|---|
| MW (AM) tuning frequency range | 531 kHz ~ 1, 602 kHz |
| LW tuning frequency range | 153 kHz ~ 279 kHz |
MD Recorder Section| system | Minidisc digital audio system |
|---|---|
| recording method | Field modulation overwrite method |
| playing rotation | Approx. 400 rpm ~ 900 rpm (CLV) |
General| power consumption | 120 W |
|---|---|
| dimensions | W: 270 mm, H: 330 mm, D: 357 mm |
| weight (net) | 9.1 kg (20 lb) |
Speaker Configuration| woofer | 180 mm, cone type |
|---|---|
| tweeter | 65 mm, cone type |
| super-tweeter | 25 mm, dome type |
General| impedance | 6 Ω |
|---|---|
| maximum input level | 100 W |
| dimensions | W: 220 mm, H: 330 mm, D: 316 mm |
Important warnings and caution symbols regarding safe operation and potential hazards.
Explanation of controls specific to the Amplifier/Tuner, MD, and CD sections.
How to navigate through tracks during CD playback.
How to set disc or all discs for repeated playback.
How to navigate and control MD playback.
Procedure to program desired tracks in a specific order for MD playback.
How to set programmed tracks or entire disc for repeated playback.
Steps for preparing MD recording and selecting the source.
Operations for controlling MD recording process and levels.
Explanation of CCRS and a summary of available recording methods.
How to perform one-touch recording of all tracks from CD to MD or Tape.
How to record only a desired track from CD or MD.
How to record the first tracks of CDs onto MD or Tape.
Instructions for managing titles of discs and tracks.
Methods for reordering, dividing, and combining tracks on an MD.
How to erase single tracks or all tracks from an MD.
How to select and apply equalizer patterns for desired sound.
Instructions for creating and saving custom equalizer patterns.
Guide to activating and adjusting the SRS 3D stereo effect.
Step-by-step instructions for setting the unit's clock.
Explanation of O.T.T. and Sleep Timer functions.
Introduction to the two 24-hour timer systems for programming.
How to set timer periods and make reservations for playback or recording.
Troubleshooting common symptoms and issues with the MD recorder.
Explanation of MD recorder displayed messages and required actions.
Common issues and solutions for the CD player section.
To Next Page
