Kenwood XD-980MD User Manual

XD-980MD (En)
59
Preparation section Basic section Application section Knowledge sections
MD Edit Functions

Combining two tracks
(TRACK COMBINE)
Use the following procedure to combine two tracks into
one by deleting a track number. This operation allows to
connect several tracks or a piece of music divided into sev-
eral parts. After this operation, the track numbers of tracks
located after the combined tracks are decreased automati-
cally.
Execute the track combine operation.
Select “COMBINE”.
3
1
1Select “COMBINE”.
2
Select the track to be combined.
After editing, eject and remove the mini disc.
“WRITING” displayed during the mini disc ejection opera-
tion indicates that the data associated with recording or
editing is being written on the disc. Do not apply vibration
or shock to the unit while this message is displayed.
2Set it.
1Select the track number.
Each press switches the operation.
When pressed in stop mode:
1 MOVE ? (Moving a single track)
2 COMBINE ? (Combining tracks)
3 ALL ERASE ? (Erasing of all tracks)
4 Editing cancelled
÷To combine two tracks during playback, press the TRACK EDIT
(TRACK EDIT/CHARA.) key while the second track is being
played. (The track being played and the track immediately before
it will be combined.)
÷ If the operation is started during playback, it pauses automatically.
÷ Editing is aborted if no operation has been performed for 8 seconds.
“COMBINE” cannot be selected if the track being played is the
first track on the disc.
If you combine tracks during playback,
go to step 3.
÷If editing has been started during playback, playback restarts
automatically from the current track.
Connecting tracks 2 and 3.
Track No. is
adjusted.
Track No. and title of the second
track are cleared.
Track No. and title of the first
track are left.
Should be approx. 2 sec. or longer.
TRACK EDIT
E
N
T
E
R
S
E
T
To increase
track No.
-
4
C
H
A
R
A
C
T
E
R
¢
+
To decrease
track No.



A B D
1 2 3
A B D
1 2 43
C
( − dB)
-
--+
@
-
-
-
?
R
L
∞
3 0130
10
5
( − dB)
0
02+
@
0
0
3
?
R
L
∞
3 0130
10
5
( − dB)
0
02+
@
0
0
3
?
R
L
∞
3 0130
10
5
( − dB)
C
OMPL
E
T
E
!
R
L
∞
3 0130
10
5
The names in brackets in the explanations are the names of the
remote control keys.
2Set it.
S
E
T
When pressed in play mode:
1 DIVIDE ? (Dividing a track)
2 COMBINE ? (Combining tracks)
3 ERASE ? (Erasing one track)
4 Editing cancelled
4

Kenwood XD-980MD Specifications