EasyManuals Logo

Kenwood XD-980MD User Manual

Kenwood XD-980MD
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #49 background imageLoading...
Page #49 background image
XD-980MD (En)
49
Preparation section Basic section Application section Knowledge sections
Convenient Recording Methods
Recording of one CD or several CDs (CD
=
TAPE)
(Program recording)
The desired tracks from 3 CDs can be recorded in the programmed sequence on one tape.
Please read “Let's record” in the operation manual of the cassette deck (option) carefully.
Recording preparation is required.
r
Start edit recording.
Check that the CD player is in the stop mode.
3
4
Enter disc Nos. and track Nos. in the order you
want to record them.
÷Select CD tracks so that their total playing time does not
exceed the recording time of the tape.
÷Up to 32 tracks can be programmed. When “FULL” is dis-
played, no more tracks can be programmed.
÷If you make a mistake, press the P.CLEAR key and enter the
track No. from the beginning.
÷The REPEAT key is not effective.
1
Always remove the disc after recording.
1 Select the disc.
2Select the track.
To edit tracks from more than one CD, repeat 1 , 2 , 3 for
each CD.
To check the edited contents
üQ
To clear the edited contents
Q
Displays the entered track No.
Light the “PGM” indicator.
2
Lights
Lights
If it is in play mode
÷
The tape recording is paused while the CD is exchanged in the tray.
÷ Tracks programmed in excess of the tape recording time will be
cut off.
Go to step 2
within 8 sec-
onds.
Note
Note
When equalizer, SRS 3D, or any other effect is applied
to the sound, the sound with applied effect can be re-
corded.
´ˇ
AUTO
P. MODE
DISC SKIP
3 Confirm the selection.
P. MODE
CD TAPE
PGM
CD)2 ))3
EX
.
BASS
:
123
EQ.
CLASSIC
MANUAL
POPROCK
VOL.
2
3
4
PGM
CD)1 )))
EX
.
BASS
:
123
EQ.
CLASSIC
MANUAL
POPROCK
VOL.
6
2
3
4
5
PGM
CD )2 P-)2
EX
.
BASS

123
RUNNING
INDICATOR
EQ.
CLASSIC
MANUAL
POPROCK
VOL.
8
2
With recording onto tape, the track will be inter-
rupted for the part of the guide tape at the tape re-
versal, where recording is not possible. Please use a
different recording method if this is to be avoided.
0
+10
7
8
9
4
5
6
1
2
3
PTY
SEARCH

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kenwood XD-980MD and is the answer not in the manual?

Kenwood XD-980MD Specifications

Main unit (RXD-980MD)

Amplifier Section IconAmplifier Section
rated power output50 watts per channel minimum RMS at 6 Ω, 1 kHz
signal to noise ratio85 dB (AUX)
input sensitivity / impedanceAUX: 200 mV / 30 kΩ, MIC 1, 2: 3.0 mV / 22 kΩ
Tuner Section IconTuner Section
FM tuning frequency range87.5 MHz ~ 108 MHz
MW (AM) tuning frequency range531 kHz ~ 1, 602 kHz
LW tuning frequency range153 kHz ~ 279 kHz
MD Recorder Section IconMD Recorder Section
systemMinidisc digital audio system
recording methodField modulation overwrite method
playing rotationApprox. 400 rpm ~ 900 rpm (CLV)
General IconGeneral
power consumption120 W
dimensionsW: 270 mm, H: 330 mm, D: 357 mm
weight (net)9.1 kg (20 lb)

Speakers (LS-N750)

Speaker Configuration IconSpeaker Configuration
woofer180 mm, cone type
tweeter65 mm, cone type
super-tweeter25 mm, dome type
General IconGeneral
impedance6 Ω
maximum input level100 W
dimensionsW: 220 mm, H: 330 mm, D: 316 mm

Related product manuals