The following instructions must be observed.
• This instrument was designed and is checked in accordance with
regulations in force EN 60950 (“Safety of information technology
equipment, including electrical business equipment”).
A hazardous situation may occur if this instrument is not used for
its intended purpose or is used incorrectly. Please note operating
instructions provided in this manual.
• The instrument must be installed, operated and maintained by
personnel who have been properly trained. Personnel must read
and understand this manual prior to installation and operation of the
• The manufacturer assumes no liability for damage caused by incorrect
use of the instrument or for modifi cations or changes made to the
• The manufacturer reserves the right to modify technical data without
To Next Page
Loading...