KERN CPB 3K1M - User Manual

KERN & Sohn GmbH
Ziegelei 1
D-72336 Balingen-Frommern
E-Mail: info@kern-sohn.com
Tel: 0049-[0]7433- 9933-0
Fax: 0049-[0]7433-9933-149
Internet: www.kern-sohn.com
GB
Service Manual
Electronic Counting Balance
Page 2
KERN CPB
Software rev.: 3.02 & above
Version 2.1 11/2007

KERN CPB 3K1M Specifications

General

Brand	KERN
Model	CPB 3K1M
Category	Scales
Language	English

Summary

Specifications

Troubleshooting

Installation

General Installation

Provides guidelines on selecting an appropriate location, avoiding environmental extremes, and ensuring stability for accurate operation.

Preparation for Use

Service Parameters

Enter Calibration Parameter via 0000

Explains entering calibration mode using default PIN '0000' via jumper and power application.

F1 - Calibration Procedure

Details steps for performing calibration: removing weight, applying calibration weight, and verifying results.

Enter Service Parameters via 2006

F1 - Calibration

Details the procedure for scale calibration when accessed via the '2006' service code.

F9 - Set PIN

Guides on changing the user PIN number to access service parameters.