KERN FKB 16K0.05

TFKB_B-BA-e-2210 27
9 Operating concept
From factory the balance is delivered with various applications (normal weighing,
check weighing, counting). After the first start-up the balance is in the <Weighing>
application.
In the application menu (see chap.13.2.) however, you can define, selecting an
application, in which mode the balance after switching-on has to continue working.
Either as per standard in weighing mode or e.g. as check balance or counting
balance
Selecting an application:
 Press the TARE key and hold it until
<apcmen > is displayed.
 The display changes to <wghmode > followed by
<Ptare >.
 Use the TARE-button to select the menu setting <mode >
and acknowledge with ➔ button.
 The last active application, e.g.,<weih > is displayed.
 Use the TARE-button to select the desired mode,
selectable
wei h
Weighing mode
count
Counting mode
check
Check mode
 Acknowledge selection by ➔ button.