34 TFKB_B-BA-e-2210
10.3 Quick change button
The quick-change button can be allocated with a unit where, if needed, it is
possible to switch over fast and conveniently into another enabled unit.
10.3.1 Weighing Units
Enable unit:
The unit for quick selection can be set when the key
is pressed for the first time.
Press the button, wait until the display flashes.
Press the button to select the required unit and
confirm by pressing the ➔ key.
Now the preset units can be changed by briefly
pressing the button.
Using button, it is possible to switch over
between the enabled unit 1 and unit 2.
Select menu setting < unit > and confirm on ➔
button.
Wait until the display starts flashing and confirm on
➔ button.
From here on, with the button, all units can be
selected anew.
To Next Page
Loading...
