USB interface*
*only in connection with KUP interface
Switch on / off add-up mode,
see chap. 14.2.1
On, off
Data output by pressing the PRINT button
(see chap. 14.2.2)
On, off
Automatic data output with stable and
positive weighing value
see chap.14.2.3. Another output only after
zero display and stabilisation, depending
on the settings
< >, selectable (off, 1, 2, 3,4,5)
Setting output interval
see chap. 14.2.4.
On, off
0 (unloaded) also transmit
continuously
On, off
Transmit stable values only
Displayed weight value is
transmitted
Long (detailed measurement
protocol)
Short (standard measurement
protocol)
On, off
Output model designation of the
scale
On, off
Output serial number of the scale
Reset settings to factory defaults