PFB-BA-e-1630 23
Switch off Sale mode: Setting „SALE n“ = 6000 e or 60000 d
• The totalizing function is available
• The weighing units gram and carat are available
Start balance by pressing . While the
balance carries out a self test, press until
„F1 Unt“ appears
Press repeatedly until „SALE n“ is
displayed
Press adjustment switch on the lower side of the balance!
(when „SALE n“ is not displayed, press )
Confirm setting by
The balance changes automatically into weighing mode
and thus will be adjusted for 6000 e or 60000 d.
Connect the second display to the balance via the delivered connecting cable
Now the balance can be controlled via the second display:
Press to switch on or off only the second display
Reset balance and second display to zero by
Tare balance and second display to zero by
To Next Page
Loading...
Need help?
General
