Need help?Do you have a question about the KERN PFB and is the answer not in the manual?
General| Minimum part weight at piece counting (Laboratory scale) | 0.01 g |
|---|---|
| Weighing plate material | stainless steel |
| Power supply | AC adapter / 6xAA batteries |
| Power supply/adapter included | yes |
| Operating temperature | 10 °C - 30 °C |
| Weighing units | g, kg, oz, lb, pcs, % |
| Pan Size | 130x130mm |
| Calibration | External |
| Interface | RS-232 |
Details recommended conditions for balance installation to ensure accurate results.
Steps for initial setup, including reaching operating temperature and power connection.
Explanation of why and when balance adjustment is necessary due to gravity.
Details on how to perform the adjustment procedure using a recommended weight.
Step-by-step guide for adjusting non-verifiable balance models.
Step-by-step guide for adjusting PFB-M specific balance models.
Explains linearity deviation and how linearization can improve accuracy.
Procedure for linearizing non-verifiable models with low resolution.
Procedure for linearizing both non-verifiable and verifiable balance models.
Information on when and how balances must be officially verified.
Details the function of each key on the balance's keypad.
Explains the meaning of various symbols and indicators on the balance display.
Procedure for performing basic weighing operations on the balance.
How to use the tare function to exclude container weight from measurements.
To Next Page
