KERN PFB

36 PFB-BA-e-1322
8.5.2 Models PFB-M
Balance display
Operation
 Start balance by pressing
ON
OFF
.
The balance will carry out a self-test.
Wait for the „0.0 g“ display.
 Put a reference weight on the weighing plate, which
corresponds to 100%
(example)
 Press
In the display appears „100.00%“
 Remove reference weight
The display returns to „0.0 %“
 Put on specimen
In the display appears the percentage of the specimen
with reference to the reference weight.
 Back to weighing mode by pressing again the
button.