KERN PFB

PFB-BA-e-1322 17
6.8.1 Linearization non-verifiable models (low resolution)
Balance display
Operation
 Start balance by pressing
ON
OFF
Whilst the
balance carries out a self test, press until
„F1 Unt“ appears
 Press repeatedly until “tECH“ appears
 Press , „Pin“ appears
 Press , and successively, „P1
Lin“ appears
 Press anew, „Pin“ appears again
 Press successively , and , „LoAd
0“ appears; after the apparition of the stability
display and the signal sound, „LoAd 1“ will be
displayed