KERN PFB 120-3 Operating Instruction

42 PFB-BA-e-1630
8.6.3 Multi-Tare function (only models PFB-M)
The balance can be tared several times successively. For that make in the menu the
following setting:
Balance display
Operation
 Start balance by pressing .
While the balance carries out a self test, press .
„F1 Unt“ is displayed.
 Press repeatedly until „tECH“ is displayed
Press adjusting switch!
 Press , „Pin“ is displayed
 Enter password using the buttons , and
successively, „P1 Lin“ is displayed
 Press repeatedly until „P8 5-t“ is displayed
 Press , „St on“ is displayed
(if „St on“ is not displayed, press )
 Press again, the Multi-Tare function is now
enabled.
 Return to weighing mode using
ON
OFF

KERN PFB 120-3 Specifications

General

Brand	KERN
Model	PFB 120-3
Category	Scales
Language	English