EN
89
WARNING:
If overflow occurs, turn off the main water supply before calling a service.
If there is water in the base pan because of an overfill or small leak, the water should
be removed before restarting the dishwasher.
CHAPTER 11: ERROR CODES
If there is a malfunction, the dishwasher will display error codes to identify these:
Codes Meanings Possible Causes
E1 Longer inlet time.
Faucets is not opened,
or water intake is
restricted, or water pressure
is too low.
E3
Not reaching required
temperature.
Malfunction of heating
element.
E4 Overflow.
Some element
of dishwasher leaks.
E8
Failure of orientation
of distributary valve.
Open circuit or break
of distributary valve.
E9
Keep pressing a button
more than 30 seconds.
Water or something on the
button.
To Next Page
Loading...
Need help?
General
